OWC 4GB DDR4 2400 CL17 1Rx8 260-pin SODIMM for POS Kitchen Controller 5 (1925)
- 4GB
- 260-Pin DDR4 Non-EC…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
OWC
An 8 GB DDR3L SODIMM running at 1600 MHz with CL11 latency for NCR POS Columbus 900 and P1235 systems
This OWC 8GB DDR3L SODIMM is built for the NCR POS Columbus 900, P1235 and 7745 systems. It delivers a single 8GB module rated at 1600MHz with CL11 latency. The 204-pin unbuffered design operates at 1.35V. JEDEC compliance ensures a warranty-safe upgrade for these point-of-sale platforms.
The module is non-ECC and unbuffered, so it will not satisfy hardware that requires error-correction or registered signalling. Buyers whose POS units demand higher-density DIMMs or a different pin count should look elsewhere. This part addresses only the specific Columbus 900, P1235 and 7745 compatibility listed.
The memory uses the 204-pin DDR3L SODIMM form factor, which is the single specification that determines physical and electrical fit. Only systems accepting this exact module type will recognise the upgrade. Verify the slot type before ordering.
| Brand | OWC |
|---|---|
| Part Number | 1S6T32R808GB |
| Capacity | 8GB |
| Type | 204-Pin DDR3L Non-ECC SODIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | NCR POS Columbus 900 NCR POS P1235 NCR POS (7745) |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The stick operates at the JEDEC low-voltage 1.35 V level, which reduces heat output compared with standard 1.5 V DDR3 and suits all-day operation in the Columbus 900 or P1235 chassis.
A single DDR3L 204-pin SO-DIMM socket is required; the Columbus 900 and P1235 POS (7745) platforms include this slot.
The module is non-ECC and unbuffered, matching the specification for the Columbus 900; OWC tests each stick to meet the OEM requirements for that platform.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?