OWC 4GB DDR4 2400 CL17 1Rx8 260-pin SODIMM for POS Kitchen Controller 5 (1925)
- 4GB
- 260-Pin DDR4 Non-EC…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
An 8 GB DDR3L SODIMM running at 1600 MHz with CL11 latency for NCR POS Columbus 900 and P1235 systems
This OWC 8GB DDR3L SODIMM is built for the NCR POS Columbus 900, P1235 and 7745 systems. It delivers a single 8GB module rated at 1600MHz with CL11 latency. The 204-pin unbuffered design operates at 1.35V. JEDEC compliance ensures a warranty-safe upgrade for these point-of-sale platforms.
The module is non-ECC and unbuffered, so it will not satisfy hardware that requires error-correction or registered signalling. Buyers whose POS units demand higher-density DIMMs or a different pin count should look elsewhere. This part addresses only the specific Columbus 900, P1235 and 7745 compatibility listed.
The memory uses the 204-pin DDR3L SODIMM form factor, which is the single specification that determines physical and electrical fit. Only systems accepting this exact module type will recognise the upgrade. Verify the slot type before ordering.
| Brand | OWC |
|---|---|
| Part Number | 1S6T32R808GB |
| Capacity | 8GB |
| Type | 204-Pin DDR3L Non-ECC SODIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | NCR POS Columbus 900 NCR POS P1235 NCR POS (7745) |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The stick operates at the JEDEC low-voltage 1.35 V level, which reduces heat output compared with standard 1.5 V DDR3 and suits all-day operation in the Columbus 900 or P1235 chassis.
A single DDR3L 204-pin SO-DIMM socket is required; the Columbus 900 and P1235 POS (7745) platforms include this slot.
The module is non-ECC and unbuffered, matching the specification for the Columbus 900; OWC tests each stick to meet the OEM requirements for that platform.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?