OWC
OWC 4GB DDR4 2400 CL17 1Rx8 260-pin SODIMM for POS Kitchen Controller 5 (1925)
A 4GB DDR4 2400 SODIMM module built for the NCR POS Kitchen Controller 5 (1925)
- Capacity4GB
- Type260-Pin DDR4 Non-ECC SODIMM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.2V
- ECCNo
- Boosts POS responsiveness with 4 GB DDR4 2400 module
- JEDEC-standard build ensures warranty-safe upgrade path
- Low 1.2 V operation keeps system power draw minimal
- Single-rank 1Rx8 layout simplifies memory-channel population
- Direct-fit 260-pin SODIMM installs in minutes without tools
System-Specific DDR4 Module
This OWC 4GB DDR4 2400 SODIMM is built for the NCR POS Kitchen Controller 5 (1925). It delivers a JEDEC-standard PC4-19200 CL17 upgrade in a single unbuffered non-ECC module. The part number 2S4D41R804GB confirms exact OEM compatibility.
Installation Requirements
The module fits a 260-pin DDR4 slot and runs at 1.2V without a heat spreader. Its 1Rx8 rank layout matches the controller’s memory architecture, freeing the second slot for an identical stick if the board supports dual-channel operation. No BIOS configuration or voltage adjustment is required.
Target Audience
Technicians servicing the Kitchen Controller 5 (1925) who need a warranty-safe capacity increase should use this module. Builders working on any other platform, or anyone needing ECC, registered DIMMs, or a different speed grade, must select a different part.
商品特色
- Boosts POS responsiveness with 4 GB DDR4 2400 module
- JEDEC-standard build ensures warranty-safe upgrade path
- Low 1.2 V operation keeps system power draw minimal
- Single-rank 1Rx8 layout simplifies memory-channel population
- Direct-fit 260-pin SODIMM installs in minutes without tools
商品規格
| Brand | OWC |
|---|---|
| Part Number | 2S4D41R804GB |
| Capacity | 4GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | NCR POS Kitchen Controller 5 (1925) |
其他版本
同系列還有 5 款
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
OWC 8GB DDR3 1600 CL11 ECC UDIMM 2Rx8 1.5V 240-pin memory upgrade
- 8GB
- 240-Pin DDR3 ECC UD…
OWC 8GB DDR3L 1600 CL11 2Rx8 1.35V SODIMM for NCR POS P1532/P1535
- 8GB
- 204-Pin DDR3L Non-E…
OWC 8GB DDR3 1066 PC3-8500 CL7 2Rx8 204-pin 1.5V SODIMM for N3000 (1657)
- 8GB
- 204-Pin DDR3 Non-EC…
OWC 8GB DDR3L 1600 CL11 2Rx8 1.35V SODIMM memory upgrade for RealPOS XR5 (7603) XR7 (7702)
- 8GB
- 204-Pin DDR3L Non-E…
商品問答
Will the 260-pin SODIMM fit the single memory slot on my Kitchen Controller 5 (1925) without a heat spreader?
Yes, the 4 GB module is built to the exact 260-pin DDR4 form factor used by the Kitchen Controller 5 and has no heat spreader, so it seats directly in the slot.
How much power does the 1.2 V DDR4 module draw when the terminal runs continuously?
The module operates at the standard 1.2 V DDR4 voltage, keeping power draw low even during all-day operation in the POS unit.
Do I need matching OWC sticks or can I add this 4 GB module alongside the original memory?
OWC recommends using modules of the same capacity, speed and manufacturer for optimal performance, so pairing this stick with an identical 4 GB DDR4 2400 CL17 module is advised.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。








