Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Three vacuum-sealed spools of white purple black filament on cardboard spools

PrintOxe

PrintOxe PLA+ Pro 3 Pack White Purple Black 1.75 mm 1 Kg each +/- .03 mm 3d printers accessory

SKU CH-WSD6-KQH7J

Three spools of 1.75 mm PLA+ filament in white, purple and black, each 1 kg net weight with ±0.03 mm accuracy for consistent FDM printing

  • TypeFilament
  • Three colours give variety for multi-part prints
  • each spool holds 1 Kg net weight
  • dimensional accuracy within .03 mm for consistent extrusion
  • vacuum-sealed with desiccant keeps filament dry
  • 75 mm diameter fits most FDM printers

Three-colour PLA+ filament set

This bundle contains three 1 kilogram spools of 1.75 mm PLA+ filament in white, purple and black. The material is formulated for extra strength, lower shrinkage and strong layer adhesion with a dimensional accuracy of +/- .03 mm. It is designed for FDM 3D printers that accept 1.75 mm filament. Total net weight is 6.6 lbs.

Printer compatibility and spool fit

Verify that your FDM printer uses 1.75 mm filament and that the spool dimensions suit your holder. Each spool measures 7.88 inches in diameter, 2.69 inches wide with a 2.20 inch hub hole. The filament is vacuum sealed with desiccant to protect against moisture before use.

Sealed packaging and colour note

Every spool arrives vacuum sealed with desiccant inside its own box, keeping the filament dry until opened. The supplier notes that colours shown in images may vary slightly from the actual filament because monitor calibration differs. No additional software or tools are included in the package.

Βασικά χαρακτηριστικά

  • Three colours give variety for multi-part prints
  • each spool holds 1 Kg net weight
  • dimensional accuracy within .03 mm for consistent extrusion
  • vacuum-sealed with desiccant keeps filament dry
  • 75 mm diameter fits most FDM printers

Προδιαγραφές

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

Ερωτήσεις για αυτό το προϊόν

What comes in the box and what do I need to buy separately?

The box contains three vacuum-sealed spools — white, purple and black — each holding 1 kg net of 1.75 mm PLA+ filament with desiccant. No extra items are included; you only need a compatible FDM printer.

How do I choose between the three colours in this pack?

You receive all three colours — white, purple and black — in one package, so there is no separate choice to make; each spool provides 1 kg of the same PLA+ formulation.

What does the ±0.03 mm accuracy mean for my prints?

The filament diameter stays within 1.75 mm ±0.03 mm, giving consistent extrusion, strong layer adhesion and minimal warping or clogging on any FDM printer that takes 1.75 mm filament.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.