暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three vacuum-sealed spools of white purple black filament on cardboard spools

PrintOxe

PrintOxe PLA+ Pro 3 Pack White Purple Black 1.75 mm 1 Kg each +/- .03 mm 3d printers accessory

SKU CH-WSD6-KQH7J

Three spools of 1.75 mm PLA+ filament in white, purple and black, each 1 kg net weight with ±0.03 mm accuracy for consistent FDM printing

  • TypeFilament
  • Three colours give variety for multi-part prints
  • each spool holds 1 Kg net weight
  • dimensional accuracy within .03 mm for consistent extrusion
  • vacuum-sealed with desiccant keeps filament dry
  • 75 mm diameter fits most FDM printers

Three-colour PLA+ filament set

This bundle contains three 1 kilogram spools of 1.75 mm PLA+ filament in white, purple and black. The material is formulated for extra strength, lower shrinkage and strong layer adhesion with a dimensional accuracy of +/- .03 mm. It is designed for FDM 3D printers that accept 1.75 mm filament. Total net weight is 6.6 lbs.

Printer compatibility and spool fit

Verify that your FDM printer uses 1.75 mm filament and that the spool dimensions suit your holder. Each spool measures 7.88 inches in diameter, 2.69 inches wide with a 2.20 inch hub hole. The filament is vacuum sealed with desiccant to protect against moisture before use.

Sealed packaging and colour note

Every spool arrives vacuum sealed with desiccant inside its own box, keeping the filament dry until opened. The supplier notes that colours shown in images may vary slightly from the actual filament because monitor calibration differs. No additional software or tools are included in the package.

特長

  • Three colours give variety for multi-part prints
  • each spool holds 1 Kg net weight
  • dimensional accuracy within .03 mm for consistent extrusion
  • vacuum-sealed with desiccant keeps filament dry
  • 75 mm diameter fits most FDM printers

仕様

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

この商品に関する質問

What comes in the box and what do I need to buy separately?

The box contains three vacuum-sealed spools — white, purple and black — each holding 1 kg net of 1.75 mm PLA+ filament with desiccant. No extra items are included; you only need a compatible FDM printer.

How do I choose between the three colours in this pack?

You receive all three colours — white, purple and black — in one package, so there is no separate choice to make; each spool provides 1 kg of the same PLA+ formulation.

What does the ±0.03 mm accuracy mean for my prints?

The filament diameter stays within 1.75 mm ±0.03 mm, giving consistent extrusion, strong layer adhesion and minimal warping or clogging on any FDM printer that takes 1.75 mm filament.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。