Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Three vacuum-sealed spools of white purple black filament on cardboard spools

PrintOxe

PrintOxe PLA+ Pro 3 Pack White Purple Black 1.75 mm 1 Kg each +/- .03 mm 3d printers accessory

SKU CH-WSD6-KQH7J

Three spools of 1.75 mm PLA+ filament in white, purple and black, each 1 kg net weight with ±0.03 mm accuracy for consistent FDM printing

  • TypeFilament
  • Three colours give variety for multi-part prints
  • each spool holds 1 Kg net weight
  • dimensional accuracy within .03 mm for consistent extrusion
  • vacuum-sealed with desiccant keeps filament dry
  • 75 mm diameter fits most FDM printers

Three-colour PLA+ filament set

This bundle contains three 1 kilogram spools of 1.75 mm PLA+ filament in white, purple and black. The material is formulated for extra strength, lower shrinkage and strong layer adhesion with a dimensional accuracy of +/- .03 mm. It is designed for FDM 3D printers that accept 1.75 mm filament. Total net weight is 6.6 lbs.

Printer compatibility and spool fit

Verify that your FDM printer uses 1.75 mm filament and that the spool dimensions suit your holder. Each spool measures 7.88 inches in diameter, 2.69 inches wide with a 2.20 inch hub hole. The filament is vacuum sealed with desiccant to protect against moisture before use.

Sealed packaging and colour note

Every spool arrives vacuum sealed with desiccant inside its own box, keeping the filament dry until opened. The supplier notes that colours shown in images may vary slightly from the actual filament because monitor calibration differs. No additional software or tools are included in the package.

Kohokohdat

  • Three colours give variety for multi-part prints
  • each spool holds 1 Kg net weight
  • dimensional accuracy within .03 mm for consistent extrusion
  • vacuum-sealed with desiccant keeps filament dry
  • 75 mm diameter fits most FDM printers

Tekniset tiedot

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

Kysymyksiä tästä tuotteesta

What comes in the box and what do I need to buy separately?

The box contains three vacuum-sealed spools — white, purple and black — each holding 1 kg net of 1.75 mm PLA+ filament with desiccant. No extra items are included; you only need a compatible FDM printer.

How do I choose between the three colours in this pack?

You receive all three colours — white, purple and black — in one package, so there is no separate choice to make; each spool provides 1 kg of the same PLA+ formulation.

What does the ±0.03 mm accuracy mean for my prints?

The filament diameter stays within 1.75 mm ±0.03 mm, giving consistent extrusion, strong layer adhesion and minimal warping or clogging on any FDM printer that takes 1.75 mm filament.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.