Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Green PLA+ filament spool, 1.75 mm diameter, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA+ Pro Filament Fruit Green 1.75 mm 1 kg +/- 0.03 mm

SKU CH-D1CQ-426NT

1.75 mm PLA+ filament in Fruit Green, 1 kg spool with ±0.03 mm accuracy for smooth, low-shrinkage prints

  • ColorGreen
  • TypeFilament
  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy +/- 0.03 mm ensures precise extrusion
  • 100 % high-purity material reduces shrinkage and warping
  • 75 mm diameter compatible with major FDM printers
  • Recommended nozzle temperature 190 °C to 200 °C

PrintOxe PLA+ Pro Fruit Green 1 kg

PrintOxe PLA+ Pro Fruit Green is a 1.75 mm filament supplied on a 1 kg spool for fused deposition modelling printers. The material is a high-purity PLA+ formulation designed for makers and small-batch producers who need consistent extrusion and reliable layer bonding.

Vacuum-sealed spool with desiccant

The spool arrives vacuum-sealed with a desiccant pack inside the retail box to protect the filament from humidity and moisture during storage. This packaging helps maintain the dimensional accuracy of ±0.03 mm and reduces the risk of bubbling or clogging caused by absorbed water.

Extrusion window 190 °C to 200 °C

The recommended nozzle temperature range is 190 °C to 200 °C, which suits most standard hot-ends but limits use with printers that cannot reach or accurately hold these temperatures. Dimensional tolerance of ±0.03 mm also means the filament may not meet the stricter requirements of high-precision engineering applications.

Βασικά χαρακτηριστικά

  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy +/- 0.03 mm ensures precise extrusion
  • 100 % high-purity material reduces shrinkage and warping
  • 75 mm diameter compatible with major FDM printers
  • Recommended nozzle temperature 190 °C to 200 °C

Προδιαγραφές

BrandPrintOxe
ModelPLA+ / Pro PLA
ColorGreen
TypeFilament

Ερωτήσεις για αυτό το προϊόν

Will the 1.75 mm diameter stay within the ±0.03 mm tolerance after months of storage?

The filament is vacuum-sealed with desiccant to protect against humidity, which helps maintain the stated ±0.03 mm dimensional accuracy over time.

At what point does the 190–200 °C nozzle temperature range limit print speed on long jobs?

Staying within the 190–200 °C extrusion window prevents overheating; pushing speeds beyond what that temperature allows can cause under-extrusion on extended prints.

How much heat does the spool add to an enclosure during all-day printing?

The PLA+ material prints at 190–200 °C, so the filament itself contributes minimal ambient heat compared with the hot-end and heated bed during continuous operation.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.