暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green PLA+ filament spool, 1.75 mm diameter, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA+ Pro Filament Fruit Green 1.75 mm 1 kg +/- 0.03 mm

SKU CH-D1CQ-426NT

1.75 mm PLA+ filament in Fruit Green, 1 kg spool with ±0.03 mm accuracy for smooth, low-shrinkage prints

  • ColorGreen
  • TypeFilament
  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy +/- 0.03 mm ensures precise extrusion
  • 100 % high-purity material reduces shrinkage and warping
  • 75 mm diameter compatible with major FDM printers
  • Recommended nozzle temperature 190 °C to 200 °C

PrintOxe PLA+ Pro Fruit Green 1 kg

PrintOxe PLA+ Pro Fruit Green is a 1.75 mm filament supplied on a 1 kg spool for fused deposition modelling printers. The material is a high-purity PLA+ formulation designed for makers and small-batch producers who need consistent extrusion and reliable layer bonding.

Vacuum-sealed spool with desiccant

The spool arrives vacuum-sealed with a desiccant pack inside the retail box to protect the filament from humidity and moisture during storage. This packaging helps maintain the dimensional accuracy of ±0.03 mm and reduces the risk of bubbling or clogging caused by absorbed water.

Extrusion window 190 °C to 200 °C

The recommended nozzle temperature range is 190 °C to 200 °C, which suits most standard hot-ends but limits use with printers that cannot reach or accurately hold these temperatures. Dimensional tolerance of ±0.03 mm also means the filament may not meet the stricter requirements of high-precision engineering applications.

特長

  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy +/- 0.03 mm ensures precise extrusion
  • 100 % high-purity material reduces shrinkage and warping
  • 75 mm diameter compatible with major FDM printers
  • Recommended nozzle temperature 190 °C to 200 °C

仕様

BrandPrintOxe
ModelPLA+ / Pro PLA
ColorGreen
TypeFilament

この商品に関する質問

Will the 1.75 mm diameter stay within the ±0.03 mm tolerance after months of storage?

The filament is vacuum-sealed with desiccant to protect against humidity, which helps maintain the stated ±0.03 mm dimensional accuracy over time.

At what point does the 190–200 °C nozzle temperature range limit print speed on long jobs?

Staying within the 190–200 °C extrusion window prevents overheating; pushing speeds beyond what that temperature allows can cause under-extrusion on extended prints.

How much heat does the spool add to an enclosure during all-day printing?

The PLA+ material prints at 190–200 °C, so the filament itself contributes minimal ambient heat compared with the hot-end and heated bed during continuous operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。