Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green PLA+ filament spool, 1.75 mm diameter, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA+ Pro Filament Fruit Green 1.75 mm 1 kg +/- 0.03 mm

SKU CH-D1CQ-426NT

1.75 mm PLA+ filament in Fruit Green, 1 kg spool with ±0.03 mm accuracy for smooth, low-shrinkage prints

  • ColorGreen
  • TypeFilament
  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy +/- 0.03 mm ensures precise extrusion
  • 100 % high-purity material reduces shrinkage and warping
  • 75 mm diameter compatible with major FDM printers
  • Recommended nozzle temperature 190 °C to 200 °C

PrintOxe PLA+ Pro Fruit Green 1 kg

PrintOxe PLA+ Pro Fruit Green is a 1.75 mm filament supplied on a 1 kg spool for fused deposition modelling printers. The material is a high-purity PLA+ formulation designed for makers and small-batch producers who need consistent extrusion and reliable layer bonding.

Vacuum-sealed spool with desiccant

The spool arrives vacuum-sealed with a desiccant pack inside the retail box to protect the filament from humidity and moisture during storage. This packaging helps maintain the dimensional accuracy of ±0.03 mm and reduces the risk of bubbling or clogging caused by absorbed water.

Extrusion window 190 °C to 200 °C

The recommended nozzle temperature range is 190 °C to 200 °C, which suits most standard hot-ends but limits use with printers that cannot reach or accurately hold these temperatures. Dimensional tolerance of ±0.03 mm also means the filament may not meet the stricter requirements of high-precision engineering applications.

Pluspunten

  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy +/- 0.03 mm ensures precise extrusion
  • 100 % high-purity material reduces shrinkage and warping
  • 75 mm diameter compatible with major FDM printers
  • Recommended nozzle temperature 190 °C to 200 °C

Specificaties

BrandPrintOxe
ModelPLA+ / Pro PLA
ColorGreen
TypeFilament

Vragen over dit artikel

Will the 1.75 mm diameter stay within the ±0.03 mm tolerance after months of storage?

The filament is vacuum-sealed with desiccant to protect against humidity, which helps maintain the stated ±0.03 mm dimensional accuracy over time.

At what point does the 190–200 °C nozzle temperature range limit print speed on long jobs?

Staying within the 190–200 °C extrusion window prevents overheating; pushing speeds beyond what that temperature allows can cause under-extrusion on extended prints.

How much heat does the spool add to an enclosure during all-day printing?

The PLA+ material prints at 190–200 °C, so the filament itself contributes minimal ambient heat compared with the hot-end and heated bed during continuous operation.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.