SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Seagate
Low-power 1.5 TB desktop drive spins at 5900 RPM with 32 MB cache over SATA 3.0 Gb/s
The Seagate Barracuda LP ST31500541AS is a 1.5TB 3.5" internal hard drive built for desktop computers. It spins at 5900 RPM with a 32MB cache and connects through a SATA 3.0Gb/s interface. The drive is supplied as a bare unit and is brand new.
This drive suits system builders who prioritise reduced power consumption and cooler running temperatures over peak throughput. It is not suited for buyers who want the fastest possible access times for an operating system or active applications, nor for builds that require higher spindle speeds for sustained workloads.
The 5900 RPM rotation rate is the single specification that decides whether this is the right part. It determines the drive's average latency of 5.1ms and its overall data transfer character, making it a fit for bulk storage where low power use matters more than maximum speed.
| Brand | Seagate |
|---|---|
| Series | BarraCuda LP |
| Model | ST31500541AS |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 1.5TB |
| RPM | 5900 RPM |
| Cache | 32MB |
| Average Latency | 5.1ms |
| Features | Super-low power consumption in every power mode Cool drives provide long-lasting benefits to the PC or external drive, reducing some component and maintenance costs Meets and exceeds eco-green customers requirements Delivers power savings |
| Form Factor | 3.5" |
The drive uses a standard 3.5 inch form factor and connects via a SATA 3.0Gb/s data cable plus a SATA power connector from the PSU.
Secure the drive in a 3.5 inch bay with four screws, attach the SATA data and power cables, then initialise and format the 1.5TB volume in the operating system before use.
No scheduled maintenance is required; monitor SMART health attributes and replace the drive if reallocated sectors or seek errors begin to rise.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Καμία γλώσσα δεν ταιριάζει.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;