SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Seagate
Low-power 1.5 TB desktop drive spins at 5900 RPM with 32 MB cache over SATA 3.0 Gb/s
The Seagate Barracuda LP ST31500541AS is a 1.5TB 3.5" internal hard drive built for desktop computers. It spins at 5900 RPM with a 32MB cache and connects through a SATA 3.0Gb/s interface. The drive is supplied as a bare unit and is brand new.
This drive suits system builders who prioritise reduced power consumption and cooler running temperatures over peak throughput. It is not suited for buyers who want the fastest possible access times for an operating system or active applications, nor for builds that require higher spindle speeds for sustained workloads.
The 5900 RPM rotation rate is the single specification that decides whether this is the right part. It determines the drive's average latency of 5.1ms and its overall data transfer character, making it a fit for bulk storage where low power use matters more than maximum speed.
| Brand | Seagate |
|---|---|
| Series | BarraCuda LP |
| Model | ST31500541AS |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 1.5TB |
| RPM | 5900 RPM |
| Cache | 32MB |
| Average Latency | 5.1ms |
| Features | Super-low power consumption in every power mode Cool drives provide long-lasting benefits to the PC or external drive, reducing some component and maintenance costs Meets and exceeds eco-green customers requirements Delivers power savings |
| Form Factor | 3.5" |
The drive uses a standard 3.5 inch form factor and connects via a SATA 3.0Gb/s data cable plus a SATA power connector from the PSU.
Secure the drive in a 3.5 inch bay with four screws, attach the SATA data and power cables, then initialise and format the 1.5TB volume in the operating system before use.
No scheduled maintenance is required; monitor SMART health attributes and replace the drive if reallocated sectors or seek errors begin to rise.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?