Silver 3.5-inch bare hard drive with exposed circuit board and SATA connectors

Seagate

Seagate IronWolf Pro 10TB 7200 RPM 256MB SATA 6.0Gb/s 3.5" ST10000NE0004

SKU CH-ZDRH-R7K7D MPN ST10000NE0004

A 10 TB 3.5" SATA desktop drive built for 24/7 NAS workloads with 7200 RPM, 256 MB cache and AgileArray RAID optimisation

PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity10TB
RPM7200 RPM
Cache256MB
Average Latency4.16ms

Built for 24x7 NAS workloads with 300TB/year rating
AgileArray enables dual-plane balancing and RAID optimisation
IronWolf Health Management actively monitors drive condition
2-year Rescue Data Recovery with 90% in-house success
2M hours MTBF and 7200 RPM performance

266,99 $

0.00344237 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 132,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

10TB NAS drive for multi-bay arrays

The Seagate IronWolf Pro ST10000NE0004 is a 10TB 3.5 inch hard drive built for always-on network attached storage. It spins at 7200 RPM with a 256MB cache and connects through a SATA 6.0Gb/s interface. AgileArray firmware adds dual-plane balancing and RAID optimisation for multi-bay enclosures.

Suited for 24/7 NAS workloads up to 300TB per year

This drive targets users who need continuous operation in 1 to 16 bay systems with rotational vibration sensors and IronWolf Health Management. It is not for buyers who want a desktop drive without NAS tuning, nor for systems that require a 2.5 inch form factor or an interface other than SATA.

300TB annual workload rating defines endurance

The 300TB per year workload rate is the key figure that determines whether this drive matches the write intensity of the planned NAS deployment. A 1.2 million hour MTBF and bundled Rescue Data Recovery service support long-term reliability in RAID environments.

Βασικά χαρακτηριστικά

Built for 24x7 NAS workloads with 300TB/year rating
AgileArray enables dual-plane balancing and RAID optimisation
IronWolf Health Management actively monitors drive condition
2-year Rescue Data Recovery with 90% in-house success
2M hours MTBF and 7200 RPM performance

Προδιαγραφές

Brand	Seagate
Series	IronWolf Pro
Model	ST10000NE0004
Packaging	Bare Drive
Interface	SATA 6.0Gb/s
Capacity	10TB
RPM	7200 RPM
Cache	256MB
Average Latency	4.16ms
Features	Optimized for NAS with AgileArray. AgileArray enables dual-plane balancing and RAID optimization in multi-bay environments, with the most advanced power management possible. Actively protect your NAS with IronWolf Health Management focusing on prevention, intervention, and recovery. High performance means no lag time or downtime for users during workload traffic for the NAS. Seagate leads the competition with the highest-performing NAS drive portfolio. Seagate Rescue Data Recovery. IronWolf Pro comes with extra peace of mind for any mechanical, accidental, or natural disaster. With a
Usage	Enterprise NAS Hard Drives
Form Factor	3.5"
Height (maximum)	26.11mm
Width (maximum)	101.85mm
Length (maximum)	146.99mm
Βάρος αποστολής	0.64 kg
Διαστάσεις συσκευασίας	161 × 130 × 36 mm

Ερωτήσεις για αυτό το προϊόν

What does the SATA 6.0Gb/s interface limit in practice?

The SATA 6.0Gb/s link caps the maximum theoretical throughput at 6.0 Gb/s, which is the ceiling for both burst and sustained transfers on this drive.

What are the exact dimensions I need to clear for a 3.5-inch bay?

The drive measures 146.99 mm long, 101.85 mm wide and 26.11 mm high, so the bay and any caddy must accommodate those maximums.

Which step is most often missed when installing this bare drive into a NAS enclosure?

Many installers forget to enable AgileArray in the NAS firmware after slotting the drive, so dual-plane balancing and RAID optimisation remain inactive.

Επίσης σε αυτό το ράφι