Seagate
Seagate Cheetah NS ST3400755SSProduct 400 GB 3.5" SAS internal hard drive
- SLC
$23.99
0.00030554BTC
In stock
Seagate
Seagate IronWolf Pro 10TB 7200 RPM 256MB SATA 6.0Gb/s 3.5" ST10000NE0004
A 10 TB 3.5" SATA desktop drive built for 24/7 NAS workloads with 7200 RPM, 256 MB cache and AgileArray RAID optimisation
- PackagingBare Drive
- InterfaceSATA 6.0Gb/s
- Capacity10TB
- RPM7200 RPM
- Cache256MB
- Average Latency4.16ms
- Built for 24x7 NAS workloads with 300TB/year rating
- AgileArray enables dual-plane balancing and RAID optimisation
- IronWolf Health Management actively monitors drive condition
- 2-year Rescue Data Recovery with 90% in-house success
- 2M hours MTBF and 7200 RPM performance
10TB NAS drive for multi-bay arrays
The Seagate IronWolf Pro ST10000NE0004 is a 10TB 3.5 inch hard drive built for always-on network attached storage. It spins at 7200 RPM with a 256MB cache and connects through a SATA 6.0Gb/s interface. AgileArray firmware adds dual-plane balancing and RAID optimisation for multi-bay enclosures.
Suited for 24/7 NAS workloads up to 300TB per year
This drive targets users who need continuous operation in 1 to 16 bay systems with rotational vibration sensors and IronWolf Health Management. It is not for buyers who want a desktop drive without NAS tuning, nor for systems that require a 2.5 inch form factor or an interface other than SATA.
300TB annual workload rating defines endurance
The 300TB per year workload rate is the key figure that determines whether this drive matches the write intensity of the planned NAS deployment. A 1.2 million hour MTBF and bundled Rescue Data Recovery service support long-term reliability in RAID environments.
Highlights
- Built for 24x7 NAS workloads with 300TB/year rating
- AgileArray enables dual-plane balancing and RAID optimisation
- IronWolf Health Management actively monitors drive condition
- 2-year Rescue Data Recovery with 90% in-house success
- 2M hours MTBF and 7200 RPM performance
Specifications
| Brand | Seagate |
|---|---|
| Series | IronWolf Pro |
| Model | ST10000NE0004 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 10TB |
| RPM | 7200 RPM |
| Cache | 256MB |
| Average Latency | 4.16ms |
| Features | Optimized for NAS with AgileArray. AgileArray enables dual-plane balancing and RAID optimization in multi-bay environments, with the most advanced power management possible. Actively protect your NAS with IronWolf Health Management focusing on prevention, intervention, and recovery. High performance means no lag time or downtime for users during workload traffic for the NAS. Seagate leads the competition with the highest-performing NAS drive portfolio. Seagate Rescue Data Recovery. IronWolf Pro comes with extra peace of mind for any mechanical, accidental, or natural disaster. With a |
| Usage | Enterprise NAS Hard Drives |
| Form Factor | 3.5" |
| Height (maximum) | 26.11mm |
| Width (maximum) | 101.85mm |
| Length (maximum) | 146.99mm |
| Shipping weight | 0.64 kg |
| Package size | 161 × 130 × 36 mm |
Questions about this item
What does the SATA 6.0Gb/s interface limit in practice?
The SATA 6.0Gb/s link caps the maximum theoretical throughput at 6.0 Gb/s, which is the ceiling for both burst and sustained transfers on this drive.
What are the exact dimensions I need to clear for a 3.5-inch bay?
The drive measures 146.99 mm long, 101.85 mm wide and 26.11 mm high, so the bay and any caddy must accommodate those maximums.
Which step is most often missed when installing this bare drive into a NAS enclosure?
Many installers forget to enable AgileArray in the NAS firmware after slotting the drive, so dual-plane balancing and RAID optimisation remain inactive.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
