Small black 45mm square graphics card cooling fan with 39mm mounting holes and two-wire connector

SXDOOL

SXDOOL A4510-55SB-2UN-C1 45mm 39mm 12V 0.25A 2-wire vga cooling

SKU CH-6N71-S9CAF MPN A4510-55SB-2UN-C1

45 mm graphics-card fan with 39 mm mounting holes, 12 V / 0.25 A, 2-wire plug

Designed for Cooler Master graphics cards
45 mm diameter fits tight GPU spaces
39 mm mounting holes match original layout
12 V 0.25 A draws minimal power
2-wire 2.5 mm plug connects directly

16,99 $

0.0002154 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 382,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Replacement 45 mm VGA fan

This 45 mm Cooler Master fan matches the A4510-55SB-2UN-C1 specification exactly. It runs on 12 V and draws 0.25 A through a two-wire connector. The unit is intended as a direct swap for a worn or noisy graphics-card cooler.

Simple two-wire installation

The 39 mm mounting-hole spacing aligns with the original shroud so no new holes are needed. Only the 2.5 mm plug must be seated fully; a loose connection will stop the fan from spinning. No PWM or speed-reporting wire is present, so motherboard fan curves will not control this unit.

Suits owners of the exact Cooler Master model

Builders repairing a card that uses this specific 4510 frame will find the fit identical. Anyone needing variable-speed control, a three- or four-pin header, or a different mounting pattern should look elsewhere.

Βασικά χαρακτηριστικά

Designed for Cooler Master graphics cards
45 mm diameter fits tight GPU spaces
39 mm mounting holes match original layout
12 V 0.25 A draws minimal power
2-wire 2.5 mm plug connects directly

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

How can I confirm the fan is running correctly after installation?

Verify that the fan spins smoothly at 12V and draws approximately 0.25A; the 2-wire 2.5 mm plug should seat firmly on the graphics card header.

What is included and what must I source separately?

The package contains the 45 mm replacement fan with 39 mm mounting-hole spacing; any thermal paste, screws or adapter cables are not included.

Which version matches my Cooler Master cooler?

Choose the A4510-55SB-2UN-C1 / FY04510H12SAB model — 45 mm diameter, 39 mm hole distance, 12V 0.25A, 2-wire 2.5 mm plug — to match the original specification.

Επίσης σε αυτό το ράφι