Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small black 45mm square graphics card cooling fan with 39mm mounting holes and two-wire connector

SXDOOL

SXDOOL A4510-55SB-2UN-C1 45mm 39mm 12V 0.25A 2-wire vga cooling

SKU CH-6N71-S9CAF MPN A4510-55SB-2UN-C1

45 mm graphics-card fan with 39 mm mounting holes, 12 V / 0.25 A, 2-wire plug

  • Designed for Cooler Master graphics cards
  • 45 mm diameter fits tight GPU spaces
  • 39 mm mounting holes match original layout
  • 12 V 0.25 A draws minimal power
  • 2-wire 2.5 mm plug connects directly

Replacement 45 mm VGA fan

This 45 mm Cooler Master fan matches the A4510-55SB-2UN-C1 specification exactly. It runs on 12 V and draws 0.25 A through a two-wire connector. The unit is intended as a direct swap for a worn or noisy graphics-card cooler.

Simple two-wire installation

The 39 mm mounting-hole spacing aligns with the original shroud so no new holes are needed. Only the 2.5 mm plug must be seated fully; a loose connection will stop the fan from spinning. No PWM or speed-reporting wire is present, so motherboard fan curves will not control this unit.

Suits owners of the exact Cooler Master model

Builders repairing a card that uses this specific 4510 frame will find the fit identical. Anyone needing variable-speed control, a three- or four-pin header, or a different mounting pattern should look elsewhere.

Helstu kostir

  • Designed for Cooler Master graphics cards
  • 45 mm diameter fits tight GPU spaces
  • 39 mm mounting holes match original layout
  • 12 V 0.25 A draws minimal power
  • 2-wire 2.5 mm plug connects directly

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

How can I confirm the fan is running correctly after installation?

Verify that the fan spins smoothly at 12V and draws approximately 0.25A; the 2-wire 2.5 mm plug should seat firmly on the graphics card header.

What is included and what must I source separately?

The package contains the 45 mm replacement fan with 39 mm mounting-hole spacing; any thermal paste, screws or adapter cables are not included.

Which version matches my Cooler Master cooler?

Choose the A4510-55SB-2UN-C1 / FY04510H12SAB model — 45 mm diameter, 39 mm hole distance, 12V 0.25A, 2-wire 2.5 mm plug — to match the original specification.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.