Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black 45mm square graphics card cooling fan with 39mm mounting holes and two-wire connector

SXDOOL

SXDOOL A4510-55SB-2UN-C1 45mm 39mm 12V 0.25A 2-wire vga cooling

SKU CH-6N71-S9CAF MPN A4510-55SB-2UN-C1

45 mm graphics-card fan with 39 mm mounting holes, 12 V / 0.25 A, 2-wire plug

  • Designed for Cooler Master graphics cards
  • 45 mm diameter fits tight GPU spaces
  • 39 mm mounting holes match original layout
  • 12 V 0.25 A draws minimal power
  • 2-wire 2.5 mm plug connects directly

Replacement 45 mm VGA fan

This 45 mm Cooler Master fan matches the A4510-55SB-2UN-C1 specification exactly. It runs on 12 V and draws 0.25 A through a two-wire connector. The unit is intended as a direct swap for a worn or noisy graphics-card cooler.

Simple two-wire installation

The 39 mm mounting-hole spacing aligns with the original shroud so no new holes are needed. Only the 2.5 mm plug must be seated fully; a loose connection will stop the fan from spinning. No PWM or speed-reporting wire is present, so motherboard fan curves will not control this unit.

Suits owners of the exact Cooler Master model

Builders repairing a card that uses this specific 4510 frame will find the fit identical. Anyone needing variable-speed control, a three- or four-pin header, or a different mounting pattern should look elsewhere.

Privalumai

  • Designed for Cooler Master graphics cards
  • 45 mm diameter fits tight GPU spaces
  • 39 mm mounting holes match original layout
  • 12 V 0.25 A draws minimal power
  • 2-wire 2.5 mm plug connects directly

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How can I confirm the fan is running correctly after installation?

Verify that the fan spins smoothly at 12V and draws approximately 0.25A; the 2-wire 2.5 mm plug should seat firmly on the graphics card header.

What is included and what must I source separately?

The package contains the 45 mm replacement fan with 39 mm mounting-hole spacing; any thermal paste, screws or adapter cables are not included.

Which version matches my Cooler Master cooler?

Choose the A4510-55SB-2UN-C1 / FY04510H12SAB model — 45 mm diameter, 39 mm hole distance, 12V 0.25A, 2-wire 2.5 mm plug — to match the original specification.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.