SXDOOL
SXDOOL FP-108 150mm AC 220/240V 38W Ball Bearing Case Fan
150 mm AC axial fan runs on 220/240 V, delivers up to 6.88 m³/min airflow at 3100 rpm with ball bearings for long life
- Fan Size150mm
- 150 mm frame fits standard 122 mm mounting holes
- Ball-bearing design rated for 60,000 hours at 40 °C
- 38 W motor delivers 5.37–6.88 m³/min airflow
- Operates on 185–245 V AC at 50/60 Hz
- Aluminium alloy frame with Class B insulation withstands 1500 V test
Industrial AC Case Fan
The SXDOOL FP-108 is a 150mm square axial fan designed for direct connection to 220/240V AC mains. It targets technicians and system integrators who need forced-air cooling inside industrial enclosures, server cabinets or custom chassis where a standard DC header is not available. The aluminium alloy frame and PBT glass-fibre blades are rated for continuous operation in harsh environments.
Mains Power Constraints
The fan draws 0.22A at 38W across a 185V to 245V input range at 50/60Hz. Because it connects directly to line voltage, it cannot be speed-controlled by a motherboard PWM or voltage header. The two-wire lead provides no tachometer signal, so the host system cannot monitor rotor speed or detect a stall condition. Insulation is rated to Class B with a 1500V withstand test.
Installation Notes
Mounting uses four screws on a 122mm hole pattern; verify that your chassis matches this pitch before purchase. The 25cm flying leads require a suitable terminal block or connector rated for mains voltage — never plug the bare wires into a low-voltage header. Observe the counter-clockwise rotation arrow to ensure correct airflow direction. Ball-bearing construction supports a 60,000-hour design life at 40°C ambient.
Βασικά χαρακτηριστικά
- 150 mm frame fits standard 122 mm mounting holes
- Ball-bearing design rated for 60,000 hours at 40 °C
- 38 W motor delivers 5.37–6.88 m³/min airflow
- Operates on 185–245 V AC at 50/60 Hz
- Aluminium alloy frame with Class B insulation withstands 1500 V test
Προδιαγραφές
| Fan Size | 150mm |
|---|
Ερωτήσεις για αυτό το προϊόν
Should I pick the FP-108 EX-S1-S or the FP-108 EX-S1-B version?
Both models share the same 150x150x50 mm frame, 122 mm screw spacing, 38 W power draw and 2700-3100 RPM speed range; choose the variant your supplier has in stock.
What airflow and noise should I expect once the fan is running in my chassis?
At 50 Hz it moves 5.37 m³/min at 55 dB-A; at 60 Hz it moves 6.88 m³/min at 60 dB-A, so actual figures depend on your local mains frequency.
The fan uses a 220-240 V AC supply — what voltage range does it actually tolerate?
The operating range is 185 V to 245 V, so it will run reliably on standard European mains without a separate DC converter.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001054BTC
Διαθέσιμο