We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black aluminium frame fan with two wires

SXDOOL

SXDOOL FP-108 150mm AC 220/240V 38W Ball Bearing Case Fan

SKU CH-NFKV-23BNW MPN FP-108

150 mm AC axial fan runs on 220/240 V, delivers up to 6.88 m³/min airflow at 3100 rpm with ball bearings for long life

  • Fan Size150mm
  • 150 mm frame fits standard 122 mm mounting holes
  • Ball-bearing design rated for 60,000 hours at 40 °C
  • 38 W motor delivers 5.37–6.88 m³/min airflow
  • Operates on 185–245 V AC at 50/60 Hz
  • Aluminium alloy frame with Class B insulation withstands 1500 V test

Industrial AC Case Fan

The SXDOOL FP-108 is a 150mm square axial fan designed for direct connection to 220/240V AC mains. It targets technicians and system integrators who need forced-air cooling inside industrial enclosures, server cabinets or custom chassis where a standard DC header is not available. The aluminium alloy frame and PBT glass-fibre blades are rated for continuous operation in harsh environments.

Mains Power Constraints

The fan draws 0.22A at 38W across a 185V to 245V input range at 50/60Hz. Because it connects directly to line voltage, it cannot be speed-controlled by a motherboard PWM or voltage header. The two-wire lead provides no tachometer signal, so the host system cannot monitor rotor speed or detect a stall condition. Insulation is rated to Class B with a 1500V withstand test.

Installation Notes

Mounting uses four screws on a 122mm hole pattern; verify that your chassis matches this pitch before purchase. The 25cm flying leads require a suitable terminal block or connector rated for mains voltage — never plug the bare wires into a low-voltage header. Observe the counter-clockwise rotation arrow to ensure correct airflow direction. Ball-bearing construction supports a 60,000-hour design life at 40°C ambient.

Highlights

  • 150 mm frame fits standard 122 mm mounting holes
  • Ball-bearing design rated for 60,000 hours at 40 °C
  • 38 W motor delivers 5.37–6.88 m³/min airflow
  • Operates on 185–245 V AC at 50/60 Hz
  • Aluminium alloy frame with Class B insulation withstands 1500 V test

Specifications

Fan Size150mm

Questions about this item

Should I pick the FP-108 EX-S1-S or the FP-108 EX-S1-B version?

Both models share the same 150x150x50 mm frame, 122 mm screw spacing, 38 W power draw and 2700-3100 RPM speed range; choose the variant your supplier has in stock.

What airflow and noise should I expect once the fan is running in my chassis?

At 50 Hz it moves 5.37 m³/min at 55 dB-A; at 60 Hz it moves 6.88 m³/min at 60 dB-A, so actual figures depend on your local mains frequency.

The fan uses a 220-240 V AC supply — what voltage range does it actually tolerate?

The operating range is 185 V to 245 V, so it will run reliably on standard European mains without a separate DC converter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.