Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Square black aluminium frame fan with two wires

SXDOOL

SXDOOL FP-108 150mm AC 220/240V 38W Ball Bearing Case Fan

SKU CH-NFKV-23BNW MPN FP-108

150 mm AC axial fan runs on 220/240 V, delivers up to 6.88 m³/min airflow at 3100 rpm with ball bearings for long life

  • Fan Size150mm
  • 150 mm frame fits standard 122 mm mounting holes
  • Ball-bearing design rated for 60,000 hours at 40 °C
  • 38 W motor delivers 5.37–6.88 m³/min airflow
  • Operates on 185–245 V AC at 50/60 Hz
  • Aluminium alloy frame with Class B insulation withstands 1500 V test

Industrial AC Case Fan

The SXDOOL FP-108 is a 150mm square axial fan designed for direct connection to 220/240V AC mains. It targets technicians and system integrators who need forced-air cooling inside industrial enclosures, server cabinets or custom chassis where a standard DC header is not available. The aluminium alloy frame and PBT glass-fibre blades are rated for continuous operation in harsh environments.

Mains Power Constraints

The fan draws 0.22A at 38W across a 185V to 245V input range at 50/60Hz. Because it connects directly to line voltage, it cannot be speed-controlled by a motherboard PWM or voltage header. The two-wire lead provides no tachometer signal, so the host system cannot monitor rotor speed or detect a stall condition. Insulation is rated to Class B with a 1500V withstand test.

Installation Notes

Mounting uses four screws on a 122mm hole pattern; verify that your chassis matches this pitch before purchase. The 25cm flying leads require a suitable terminal block or connector rated for mains voltage — never plug the bare wires into a low-voltage header. Observe the counter-clockwise rotation arrow to ensure correct airflow direction. Ball-bearing construction supports a 60,000-hour design life at 40°C ambient.

Fordele

  • 150 mm frame fits standard 122 mm mounting holes
  • Ball-bearing design rated for 60,000 hours at 40 °C
  • 38 W motor delivers 5.37–6.88 m³/min airflow
  • Operates on 185–245 V AC at 50/60 Hz
  • Aluminium alloy frame with Class B insulation withstands 1500 V test

Specifikationer

Fan Size150mm

Spørgsmål om denne vare

Should I pick the FP-108 EX-S1-S or the FP-108 EX-S1-B version?

Both models share the same 150x150x50 mm frame, 122 mm screw spacing, 38 W power draw and 2700-3100 RPM speed range; choose the variant your supplier has in stock.

What airflow and noise should I expect once the fan is running in my chassis?

At 50 Hz it moves 5.37 m³/min at 55 dB-A; at 60 Hz it moves 6.88 m³/min at 60 dB-A, so actual figures depend on your local mains frequency.

The fan uses a 220-240 V AC supply — what voltage range does it actually tolerate?

The operating range is 185 V to 245 V, so it will run reliably on standard European mains without a separate DC converter.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.