U-Reach, Inc.
U-Reach, Inc. Pro 118 Portable SATA/IDE HDD Duplicator 128M Buffer 7.2 GB/mins
Portable SATA/IDE HDD duplicator with 128M buffer and 7.2 GB/min transfer rate for 2.5" and 3.5" drives
- TypeHard Drive Duplicator
- Target1 to 1
- ControllerU-Reach
- Buffer Memory128M
- Supported Media2.5"HDD, 3.5"HDD, SATA SSD; supports IDE HDD, eSATA,
- Data Transfer Rate7.2 GB/mins
- Standalone operation with 16 x 2 LCD display
- 128M buffer memory sustains 7.2 GB/mins transfer
- Copies SATA and IDE drives without a PC
- Supports 2.5 and 3.5 inch HDDs plus SATA SSDs
- RoSH and REACH compliant environmental design
Portable SATA/IDE Duplicator
The U-Reach Pro 118 is a standalone hard drive duplicator built for IT technicians and system builders who need to copy or erase 2.5" and 3.5" SATA drives along with IDE media. It operates without a host computer and includes a 16 x 2 LCD for status feedback.
Sustained Copy Speed
A 128M buffer helps maintain a steady 7.2 GB/mins transfer rate across the full duplication job rather than peaking only in short bursts. The controller manages data flow between source and target drives to keep throughput consistent during extended sessions.
Thermals Noise and Power
The unit runs from an external AC adapter and has no active cooling fans, so operation is silent in normal use. Its lightweight enclosure stays cool during typical duplication tasks and meets RoSH and REACH environmental specifications.
Βασικά χαρακτηριστικά
- Standalone operation with 16 x 2 LCD display
- 128M buffer memory sustains 7.2 GB/mins transfer
- Copies SATA and IDE drives without a PC
- Supports 2.5 and 3.5 inch HDDs plus SATA SSDs
- RoSH and REACH compliant environmental design
Προδιαγραφές
| Brand | U-Reach |
|---|---|
| Model | Pro 118 |
| Type | Hard Drive Duplicator |
| Target | 1 to 1 |
| Controller | U-Reach |
| Buffer Memory | 128M |
| Supported Media | 2.5"HDD, 3.5"HDD, SATA SSD; supports IDE HDD, eSATA, |
| Data Transfer Rate | 7.2 GB/mins |
| Language Support | English |
| Display | 16 x 2 LCD |
| Operating Type | Standalone |
| Connector | SATA |
| Environmental Spec | RoSH, REACH |
Ερωτήσεις για αυτό το προϊόν
Does the 128M buffer help keep the Pro 118 cool and quiet during all-day duplication jobs?
The duplicator runs as a standalone unit with a 128M buffer and a 16 x 2 LCD, so it operates without a host PC and produces only minimal noise from drive activity.
Which drives and cables must I already have to use the Pro 118 duplicator?
You need 2.5 or 3.5 SATA or IDE drives; the box includes an AC adapter, two SATA cables and two soft pads, so no extra power supply is required.
Will the Pro 118 work alongside my older IDE drives when I copy them to newer SATA SSDs?
Yes, the duplicator supports both IDE and SATA media including 2.5 and 3.5 drives, and it copies at up to 7.2 GB per minute in standalone mode.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001048BTC
Διαθέσιμο