Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Portable HDD duplicator with 16x2 LCD display

U-Reach, Inc.

U-Reach, Inc. Pro 118 Portable SATA/IDE HDD Duplicator 128M Buffer 7.2 GB/mins

SKU CH-SBGF-1ACGW

Portable SATA/IDE HDD duplicator with 128M buffer and 7.2 GB/min transfer rate for 2.5" and 3.5" drives

  • TypeHard Drive Duplicator
  • Target1 to 1
  • ControllerU-Reach
  • Buffer Memory128M
  • Supported Media2.5"HDD, 3.5"HDD, SATA SSD; supports IDE HDD, eSATA,
  • Data Transfer Rate7.2 GB/mins
  • Standalone operation with 16 x 2 LCD display
  • 128M buffer memory sustains 7.2 GB/mins transfer
  • Copies SATA and IDE drives without a PC
  • Supports 2.5 and 3.5 inch HDDs plus SATA SSDs
  • RoSH and REACH compliant environmental design

Portable SATA/IDE Duplicator

The U-Reach Pro 118 is a standalone hard drive duplicator built for IT technicians and system builders who need to copy or erase 2.5" and 3.5" SATA drives along with IDE media. It operates without a host computer and includes a 16 x 2 LCD for status feedback.

Sustained Copy Speed

A 128M buffer helps maintain a steady 7.2 GB/mins transfer rate across the full duplication job rather than peaking only in short bursts. The controller manages data flow between source and target drives to keep throughput consistent during extended sessions.

Thermals Noise and Power

The unit runs from an external AC adapter and has no active cooling fans, so operation is silent in normal use. Its lightweight enclosure stays cool during typical duplication tasks and meets RoSH and REACH environmental specifications.

Puncte forte

  • Standalone operation with 16 x 2 LCD display
  • 128M buffer memory sustains 7.2 GB/mins transfer
  • Copies SATA and IDE drives without a PC
  • Supports 2.5 and 3.5 inch HDDs plus SATA SSDs
  • RoSH and REACH compliant environmental design

Specificații

BrandU-Reach
ModelPro 118
TypeHard Drive Duplicator
Target1 to 1
ControllerU-Reach
Buffer Memory128M
Supported Media2.5"HDD, 3.5"HDD, SATA SSD; supports IDE HDD, eSATA,
Data Transfer Rate7.2 GB/mins
Language SupportEnglish
Display16 x 2 LCD
Operating TypeStandalone
ConnectorSATA
Environmental SpecRoSH, REACH

Întrebări despre acest articol

Does the 128M buffer help keep the Pro 118 cool and quiet during all-day duplication jobs?

The duplicator runs as a standalone unit with a 128M buffer and a 16 x 2 LCD, so it operates without a host PC and produces only minimal noise from drive activity.

Which drives and cables must I already have to use the Pro 118 duplicator?

You need 2.5 or 3.5 SATA or IDE drives; the box includes an AC adapter, two SATA cables and two soft pads, so no extra power supply is required.

Will the Pro 118 work alongside my older IDE drives when I copy them to newer SATA SSDs?

Yes, the duplicator supports both IDE and SATA media including 2.5 and 3.5 drives, and it copies at up to 7.2 GB per minute in standalone mode.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.