Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Portable HDD duplicator with 16x2 LCD display

U-Reach, Inc.

U-Reach, Inc. Pro 118 Portable SATA/IDE HDD Duplicator 128M Buffer 7.2 GB/mins

SKU CH-SBGF-1ACGW

Portable SATA/IDE HDD duplicator with 128M buffer and 7.2 GB/min transfer rate for 2.5" and 3.5" drives

  • TypeHard Drive Duplicator
  • Target1 to 1
  • ControllerU-Reach
  • Buffer Memory128M
  • Supported Media2.5"HDD, 3.5"HDD, SATA SSD; supports IDE HDD, eSATA,
  • Data Transfer Rate7.2 GB/mins
  • Standalone operation with 16 x 2 LCD display
  • 128M buffer memory sustains 7.2 GB/mins transfer
  • Copies SATA and IDE drives without a PC
  • Supports 2.5 and 3.5 inch HDDs plus SATA SSDs
  • RoSH and REACH compliant environmental design

Portable SATA/IDE Duplicator

The U-Reach Pro 118 is a standalone hard drive duplicator built for IT technicians and system builders who need to copy or erase 2.5" and 3.5" SATA drives along with IDE media. It operates without a host computer and includes a 16 x 2 LCD for status feedback.

Sustained Copy Speed

A 128M buffer helps maintain a steady 7.2 GB/mins transfer rate across the full duplication job rather than peaking only in short bursts. The controller manages data flow between source and target drives to keep throughput consistent during extended sessions.

Thermals Noise and Power

The unit runs from an external AC adapter and has no active cooling fans, so operation is silent in normal use. Its lightweight enclosure stays cool during typical duplication tasks and meets RoSH and REACH environmental specifications.

Helstu kostir

  • Standalone operation with 16 x 2 LCD display
  • 128M buffer memory sustains 7.2 GB/mins transfer
  • Copies SATA and IDE drives without a PC
  • Supports 2.5 and 3.5 inch HDDs plus SATA SSDs
  • RoSH and REACH compliant environmental design

Tæknilýsing

BrandU-Reach
ModelPro 118
TypeHard Drive Duplicator
Target1 to 1
ControllerU-Reach
Buffer Memory128M
Supported Media2.5"HDD, 3.5"HDD, SATA SSD; supports IDE HDD, eSATA,
Data Transfer Rate7.2 GB/mins
Language SupportEnglish
Display16 x 2 LCD
Operating TypeStandalone
ConnectorSATA
Environmental SpecRoSH, REACH

Spurningar um þessa vöru

Does the 128M buffer help keep the Pro 118 cool and quiet during all-day duplication jobs?

The duplicator runs as a standalone unit with a 128M buffer and a 16 x 2 LCD, so it operates without a host PC and produces only minimal noise from drive activity.

Which drives and cables must I already have to use the Pro 118 duplicator?

You need 2.5 or 3.5 SATA or IDE drives; the box includes an AC adapter, two SATA cables and two soft pads, so no extra power supply is required.

Will the Pro 118 work alongside my older IDE drives when I copy them to newer SATA SSDs?

Yes, the duplicator supports both IDE and SATA media including 2.5 and 3.5 drives, and it copies at up to 7.2 GB per minute in standalone mode.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.