VisionTek
VisionTek 901565 DLX4 1 TB internal SSD
M.2 2280 PCIe 4.0 x4 drive with 1 TB 3D NAND, 5200 MB/s read, 4370 MB/s write, 500 TBW and 256-bit AES encryption
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4
- Fast sequential reads up to 5200 MB/s for quick file access
- Sustained sequential writes up to 4370 MB/s for large transfers
- Responsive random performance with 195K read and 289K write IOPS
- 256-bit AES encryption protects stored data
- Rated for 500 TB written and 1,500,000 hours MTBF
VisionTek DLX4 1 TB consumer SSD
The VisionTek DLX4 1 TB is an internal solid state drive built for consumer workloads. It uses the M.2 2280 form factor and connects through a PCI-Express 4.0 x4 link. The drive carries the model number 901565 and is based on 3D NAND components.
500 TBW endurance and 5200 MB/s sequential headroom
The drive is rated for 500 TB of writes and delivers up to 5200 MB/s sequential read with 4370 MB/s sequential write. Random performance reaches 195K IOPS read and 289K IOPS write. Sustained heavy workloads will eventually hit the controller thermal ceiling because the module ships without a heatsink.
NVMe 1.4 protocol over PCIe 4.0 x4 lane limits
The NVMe 1.4 protocol runs over four PCIe 4.0 lanes, capping theoretical bandwidth at the interface maximum. Real-world throughput depends on host platform lane allocation and thermal conditions. The Innogrit IG5220 controller manages encryption with 256-bit AES compliance.
Βασικά χαρακτηριστικά
- Fast sequential reads up to 5200 MB/s for quick file access
- Sustained sequential writes up to 4370 MB/s for large transfers
- Responsive random performance with 195K read and 289K write IOPS
- 256-bit AES encryption protects stored data
- Rated for 500 TB written and 1,500,000 hours MTBF
Προδιαγραφές
| Brand | VisionTek |
|---|---|
| Series | DLX4 |
| Model | 901565 |
| Part Number | 901565 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Controller | Innogrit IG5220 |
| Encryption | 256-bit AES Compliant Data Encryption |
| Max Sequential Read | Up to 5200 MB/s |
| Max Sequential Write | Up to 4370 MB/s |
| 4KB Random Read | 195K IOPS |
| 4KB Random Write | 289K IOPS |
| Terabytes Written (TBW) | 500TB |
| MTBF | 1,500,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 0.3W |
| Power Consumption (Active) | 4.75W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5-95% |
| Max Shock Resistance | 1500G/0.5ms |
| Max Vibration Resistance | 2-500Hz, 3.1G |
| Width | 80.0 mm |
| Depth | 22.0 mm |
| Weight | 7g |
| Βάρος αποστολής | 0.45 kg |
| Διαστάσεις συσκευασίας | 112 × 97 × 10 mm |
Ερωτήσεις για αυτό το προϊόν
Will the DLX4 1 TB M.2 2280 fit and run in a motherboard that only has PCIe 3.0 slots?
Yes, the drive is backward compatible and will operate at PCIe 3.0 speeds when installed in a PCIe 3.0 M.2 slot, though sequential speeds will be limited to the slot's maximum bandwidth.
How can I verify the 901565 is delivering the rated 5200 MB/s read and 4370 MB/s write after installation?
Run a benchmark tool such as CrystalDiskMark using the NVMe 1.4 protocol on a PCIe 4.0 x4 link; results should approach the published sequential figures and show random read/write IOPS near 195K and 289K.
Does the VisionTek 901565 package include a heatsink or mounting screw, or must I buy them separately?
The drive ships without a heatsink; a motherboard M.2 standoff and screw are typically required for installation and are not included in the box.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
