Intel DC S3610 SSDSC2BX016T401 1.6TB 2.5" SATA enterprise SSD
- 2.5"
- 1.6TB
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
VisionTek
M.2 2280 PCIe 4.0 x4 drive with 1 TB 3D NAND, 5200 MB/s read, 4370 MB/s write, 500 TBW and 256-bit AES encryption
The VisionTek DLX4 1 TB is an internal solid state drive built for consumer workloads. It uses the M.2 2280 form factor and connects through a PCI-Express 4.0 x4 link. The drive carries the model number 901565 and is based on 3D NAND components.
The drive is rated for 500 TB of writes and delivers up to 5200 MB/s sequential read with 4370 MB/s sequential write. Random performance reaches 195K IOPS read and 289K IOPS write. Sustained heavy workloads will eventually hit the controller thermal ceiling because the module ships without a heatsink.
The NVMe 1.4 protocol runs over four PCIe 4.0 lanes, capping theoretical bandwidth at the interface maximum. Real-world throughput depends on host platform lane allocation and thermal conditions. The Innogrit IG5220 controller manages encryption with 256-bit AES compliance.
| Brand | VisionTek |
|---|---|
| Series | DLX4 |
| Model | 901565 |
| Part Number | 901565 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Controller | Innogrit IG5220 |
| Encryption | 256-bit AES Compliant Data Encryption |
| Max Sequential Read | Up to 5200 MB/s |
| Max Sequential Write | Up to 4370 MB/s |
| 4KB Random Read | 195K IOPS |
| 4KB Random Write | 289K IOPS |
| Terabytes Written (TBW) | 500TB |
| MTBF | 1,500,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 0.3W |
| Power Consumption (Active) | 4.75W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5-95% |
| Max Shock Resistance | 1500G/0.5ms |
| Max Vibration Resistance | 2-500Hz, 3.1G |
| Width | 80.0 mm |
| Depth | 22.0 mm |
| Weight | 7g |
| Shipping weight | 0.45 kg |
| Package size | 112 × 97 × 10 mm |
Yes, the drive is backward compatible and will operate at PCIe 3.0 speeds when installed in a PCIe 3.0 M.2 slot, though sequential speeds will be limited to the slot's maximum bandwidth.
Run a benchmark tool such as CrystalDiskMark using the NVMe 1.4 protocol on a PCIe 4.0 x4 link; results should approach the published sequential figures and show random read/write IOPS near 195K and 289K.
The drive ships without a heatsink; a motherboard M.2 standoff and screw are typically required for installation and are not included in the box.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?