VisionTek
VisionTek 901565 DLX4 1 TB internal SSD
M.2 2280 PCIe 4.0 x4 drive with 1 TB 3D NAND, 5200 MB/s read, 4370 MB/s write, 500 TBW and 256-bit AES encryption
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4
- Fast sequential reads up to 5200 MB/s for quick file access
- Sustained sequential writes up to 4370 MB/s for large transfers
- Responsive random performance with 195K read and 289K write IOPS
- 256-bit AES encryption protects stored data
- Rated for 500 TB written and 1,500,000 hours MTBF
VisionTek DLX4 1 TB consumer SSD
The VisionTek DLX4 1 TB is an internal solid state drive built for consumer workloads. It uses the M.2 2280 form factor and connects through a PCI-Express 4.0 x4 link. The drive carries the model number 901565 and is based on 3D NAND components.
500 TBW endurance and 5200 MB/s sequential headroom
The drive is rated for 500 TB of writes and delivers up to 5200 MB/s sequential read with 4370 MB/s sequential write. Random performance reaches 195K IOPS read and 289K IOPS write. Sustained heavy workloads will eventually hit the controller thermal ceiling because the module ships without a heatsink.
NVMe 1.4 protocol over PCIe 4.0 x4 lane limits
The NVMe 1.4 protocol runs over four PCIe 4.0 lanes, capping theoretical bandwidth at the interface maximum. Real-world throughput depends on host platform lane allocation and thermal conditions. The Innogrit IG5220 controller manages encryption with 256-bit AES compliance.
Puncte forte
- Fast sequential reads up to 5200 MB/s for quick file access
- Sustained sequential writes up to 4370 MB/s for large transfers
- Responsive random performance with 195K read and 289K write IOPS
- 256-bit AES encryption protects stored data
- Rated for 500 TB written and 1,500,000 hours MTBF
Specificații
| Brand | VisionTek |
|---|---|
| Series | DLX4 |
| Model | 901565 |
| Part Number | 901565 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Controller | Innogrit IG5220 |
| Encryption | 256-bit AES Compliant Data Encryption |
| Max Sequential Read | Up to 5200 MB/s |
| Max Sequential Write | Up to 4370 MB/s |
| 4KB Random Read | 195K IOPS |
| 4KB Random Write | 289K IOPS |
| Terabytes Written (TBW) | 500TB |
| MTBF | 1,500,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 0.3W |
| Power Consumption (Active) | 4.75W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5-95% |
| Max Shock Resistance | 1500G/0.5ms |
| Max Vibration Resistance | 2-500Hz, 3.1G |
| Width | 80.0 mm |
| Depth | 22.0 mm |
| Weight | 7g |
| Greutate la expediere | 0.45 kg |
| Dimensiunile coletului | 112 × 97 × 10 mm |
Întrebări despre acest articol
Will the DLX4 1 TB M.2 2280 fit and run in a motherboard that only has PCIe 3.0 slots?
Yes, the drive is backward compatible and will operate at PCIe 3.0 speeds when installed in a PCIe 3.0 M.2 slot, though sequential speeds will be limited to the slot's maximum bandwidth.
How can I verify the 901565 is delivering the rated 5200 MB/s read and 4370 MB/s write after installation?
Run a benchmark tool such as CrystalDiskMark using the NVMe 1.4 protocol on a PCIe 4.0 x4 link; results should approach the published sequential figures and show random read/write IOPS near 195K and 289K.
Does the VisionTek 901565 package include a heatsink or mounting screw, or must I buy them separately?
The drive ships without a heatsink; a motherboard M.2 standoff and screw are typically required for installation and are not included in the box.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
