Black 120mm square case fan 38mm thick 3-pin 24V 0.36A 2-ball bearing

Zyvpee

Zyvpee MMF-12F24DS-CP1 120mm 24V 0.36A 3-pin case fan

SKU CH-R2Y5-FV1T1

A 120 mm case fan with 38 mm depth, 24 V 0.36 A rating, 3-pin connector and dual-ball bearings for inverter cooling in PLC equipment

TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNon-LED

Original Melco design built for inverter cooling
120 × 38 mm frame fits standard 120 mm mounts
Dual ball bearing for durable 24 V operation
3-pin connector delivers 0.36 A to PLC ABB Yaskawa devices
CA2235H25 FR-A800 model matches specified part number

94,99 $

0.00119957 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 304,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Zyvpee 120 mm Inverter Cooling Fan

The Zyvpee MMF-12F24DS-CP1 is a 120 mm case fan built for industrial inverter cooling. It suits engineers and integrators who need a 24 V DC airflow solution for PLC hardware such as ABB or Yaskawa devices. The 3-pin connector provides simple power and tachometer feedback for monitoring.

Sustained Operation with Dual-Ball Bearings

Dual-ball bearings give the fan a longer service life under continuous 24 V load than sleeve alternatives. Rated at 0.36 A, the motor maintains stable speed during extended duty cycles inside enclosures. The 38 mm frame depth houses a robust rotor designed for uninterrupted airflow in demanding environments.

Direct 3-Pin Mount for Control Cabinets

The three-wire lead plugs straight into compatible inverter headers without adapters. Polarity must match the 24 V supply exactly to avoid damage. Installers should verify the 120 by 38 mm footprint clears adjacent components in tight cabinets. No PWM control is present, so speed is voltage-dependent.

Βασικά χαρακτηριστικά

Original Melco design built for inverter cooling
120 × 38 mm frame fits standard 120 mm mounts
Dual ball bearing for durable 24 V operation
3-pin connector delivers 0.36 A to PLC ABB Yaskawa devices
CA2235H25 FR-A800 model matches specified part number

Προδιαγραφές

Brand	Zyvpee
Series	MMF-12F24DS-CP1
Model	MMF-12F24DS-CP1
Type	Case Fan
Compatibility	Case
Bearing Type	2 Ball
Power Connector	3 Pin
Color	Black
LED	Non-LED
Features	Inverter Cooling
Dimensions	120*38mm

Ερωτήσεις για αυτό το προϊόν

How much heat and noise should I expect from the 24 V 0.36 A ball-bearing motor when it runs continuously?

The fan draws 0.36 A at 24 V, so its steady-state power is modest; the dual ball bearing keeps mechanical noise low and the 120 mm × 38 mm frame moves enough air for inverter cooling without excessive turbulence.

My controller cabinet only has a 3-pin 24 V header — will the supplied three-wire plug connect directly?

Yes, the unit terminates in a 3-pin connector wired for 24 V operation, matching the standard header used on ABB and Yaskawa inverter modules.

Can I mount this 120 mm × 38 mm fan in the same cut-outs used by older 12 cm Melco frames?

The 120 mm square footprint and 38 mm depth match the legacy Melco 12CM pattern, so existing screw holes and airflow paths line up without modification.

Επίσης σε αυτό το ράφι