Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 120mm square case fan 38mm thick 3-pin 24V 0.36A 2-ball bearing

Zyvpee

Zyvpee MMF-12F24DS-CP1 120mm 24V 0.36A 3-pin case fan

SKU CH-R2Y5-FV1T1

A 120 mm case fan with 38 mm depth, 24 V 0.36 A rating, 3-pin connector and dual-ball bearings for inverter cooling in PLC equipment

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Original Melco design built for inverter cooling
  • 120 × 38 mm frame fits standard 120 mm mounts
  • Dual ball bearing for durable 24 V operation
  • 3-pin connector delivers 0.36 A to PLC ABB Yaskawa devices
  • CA2235H25 FR-A800 model matches specified part number

Zyvpee 120 mm Inverter Cooling Fan

The Zyvpee MMF-12F24DS-CP1 is a 120 mm case fan built for industrial inverter cooling. It suits engineers and integrators who need a 24 V DC airflow solution for PLC hardware such as ABB or Yaskawa devices. The 3-pin connector provides simple power and tachometer feedback for monitoring.

Sustained Operation with Dual-Ball Bearings

Dual-ball bearings give the fan a longer service life under continuous 24 V load than sleeve alternatives. Rated at 0.36 A, the motor maintains stable speed during extended duty cycles inside enclosures. The 38 mm frame depth houses a robust rotor designed for uninterrupted airflow in demanding environments.

Direct 3-Pin Mount for Control Cabinets

The three-wire lead plugs straight into compatible inverter headers without adapters. Polarity must match the 24 V supply exactly to avoid damage. Installers should verify the 120 by 38 mm footprint clears adjacent components in tight cabinets. No PWM control is present, so speed is voltage-dependent.

Puncte forte

  • Original Melco design built for inverter cooling
  • 120 × 38 mm frame fits standard 120 mm mounts
  • Dual ball bearing for durable 24 V operation
  • 3-pin connector delivers 0.36 A to PLC ABB Yaskawa devices
  • CA2235H25 FR-A800 model matches specified part number

Specificații

BrandZyvpee
SeriesMMF-12F24DS-CP1
ModelMMF-12F24DS-CP1
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling
Dimensions120*38mm

Întrebări despre acest articol

How much heat and noise should I expect from the 24 V 0.36 A ball-bearing motor when it runs continuously?

The fan draws 0.36 A at 24 V, so its steady-state power is modest; the dual ball bearing keeps mechanical noise low and the 120 mm × 38 mm frame moves enough air for inverter cooling without excessive turbulence.

My controller cabinet only has a 3-pin 24 V header — will the supplied three-wire plug connect directly?

Yes, the unit terminates in a 3-pin connector wired for 24 V operation, matching the standard header used on ABB and Yaskawa inverter modules.

Can I mount this 120 mm × 38 mm fan in the same cut-outs used by older 12 cm Melco frames?

The 120 mm square footprint and 38 mm depth match the legacy Melco 12CM pattern, so existing screw holes and airflow paths line up without modification.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.