Zyvpee
Zyvpee MMF-12F24DS-CP1 120mm 24V 0.36A 3-pin case fan
A 120 mm case fan with 38 mm depth, 24 V 0.36 A rating, 3-pin connector and dual-ball bearings for inverter cooling in PLC equipment
- TypeCase Fan
- CompatibilityCase
- Bearing Type2 Ball
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Original Melco design built for inverter cooling
- 120 × 38 mm frame fits standard 120 mm mounts
- Dual ball bearing for durable 24 V operation
- 3-pin connector delivers 0.36 A to PLC ABB Yaskawa devices
- CA2235H25 FR-A800 model matches specified part number
Zyvpee 120 mm Inverter Cooling Fan
The Zyvpee MMF-12F24DS-CP1 is a 120 mm case fan built for industrial inverter cooling. It suits engineers and integrators who need a 24 V DC airflow solution for PLC hardware such as ABB or Yaskawa devices. The 3-pin connector provides simple power and tachometer feedback for monitoring.
Sustained Operation with Dual-Ball Bearings
Dual-ball bearings give the fan a longer service life under continuous 24 V load than sleeve alternatives. Rated at 0.36 A, the motor maintains stable speed during extended duty cycles inside enclosures. The 38 mm frame depth houses a robust rotor designed for uninterrupted airflow in demanding environments.
Direct 3-Pin Mount for Control Cabinets
The three-wire lead plugs straight into compatible inverter headers without adapters. Polarity must match the 24 V supply exactly to avoid damage. Installers should verify the 120 by 38 mm footprint clears adjacent components in tight cabinets. No PWM control is present, so speed is voltage-dependent.
Najważniejsze cechy
- Original Melco design built for inverter cooling
- 120 × 38 mm frame fits standard 120 mm mounts
- Dual ball bearing for durable 24 V operation
- 3-pin connector delivers 0.36 A to PLC ABB Yaskawa devices
- CA2235H25 FR-A800 model matches specified part number
Specyfikacja
| Brand | Zyvpee |
|---|---|
| Series | MMF-12F24DS-CP1 |
| Model | MMF-12F24DS-CP1 |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | 2 Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | Inverter Cooling |
| Dimensions | 120*38mm |
Pytania dotyczące tego produktu
How much heat and noise should I expect from the 24 V 0.36 A ball-bearing motor when it runs continuously?
The fan draws 0.36 A at 24 V, so its steady-state power is modest; the dual ball bearing keeps mechanical noise low and the 120 mm × 38 mm frame moves enough air for inverter cooling without excessive turbulence.
My controller cabinet only has a 3-pin 24 V header — will the supplied three-wire plug connect directly?
Yes, the unit terminates in a 3-pin connector wired for 24 V operation, matching the standard header used on ABB and Yaskawa inverter modules.
Can I mount this 120 mm × 38 mm fan in the same cut-outs used by older 12 cm Melco frames?
The 120 mm square footprint and 38 mm depth match the legacy Melco 12CM pattern, so existing screw holes and airflow paths line up without modification.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.0000105BTC
Dostępny