SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00504479BTC
Laos
A-Tech
A-Tech 4GB DDR3 1333MHz CL9 1.5V Non-ECC SODIMM 204-Pin Laptop RAM
4 GB DDR3 SODIMM runs at 1333 MHz with CL9 latency and 1.5 V for compatible Supermicro laptops
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Voltage1.50V
- ECCNo
- Supermicro certified for verified compatibility
- Hynix 4GB module built with 1333MHz DDR3 speed
- CL9 latency and 1.5V standard voltage for stable operation
- 204-pin SO-DIMM form factor fits laptop memory slots
- Rigorously tested for dependable and reliable performance
Supermicro-Certified 4GB DDR3 SODIMM
This module is a single 4GB DDR3 1333MHz CL9 stick built to Supermicro specification MEM-DR340L-HL01-SO13. It targets owners of compatible Supermicro systems who need to replace or add memory in laptops or compact servers that accept 204-pin SO-DIMMs.
Install by aligning the notch
The 204-pin edge connector fits only one way; forcing it can damage the slot. Common issues are mixing voltages or using registered modules in an unbuffered slot, so verify the system requires 1.5V unbuffered non-ECC memory before fitting.
DDR3 1333 limits bandwidth to PC3-10600 speeds
The interface caps throughput at the rated frequency, so workloads needing higher transfer rates will not benefit from faster modules the platform cannot drive. Systems locked to this generation cannot use later DDR standards without a hardware change.
Põhijooned
- Supermicro certified for verified compatibility
- Hynix 4GB module built with 1333MHz DDR3 speed
- CL9 latency and 1.5V standard voltage for stable operation
- 204-pin SO-DIMM form factor fits laptop memory slots
- Rigorously tested for dependable and reliable performance
Tehnilised andmed
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR340L-HL01-SO13 |
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | Supermicro Certified MEM-DR340L-HL01-SO13 (Hynix) |
| Recommend Use | Compatible Supermicro Systems |
Küsimused selle toote kohta
How can I confirm the module is running at 1333 MHz with CL9 timing after installation?
Open Task Manager or CPU-Z in Windows, or run dmidecode on Linux, and verify the reported speed shows 1333 MHz and CAS latency reads CL9 for the installed stick.
Does the package include only the single 4 GB SODIMM or any extra brackets or tools?
The box contains one 4 GB 204-pin DDR3 SO-DIMM module; no brackets, screws or installation tools are supplied.
Should I choose the 1.5 V CL9 version or a different voltage or latency for my Supermicro system?
Select the 1.5 V CL9 module listed as MEM-DR340L-HL01-SO13; it matches the certified Supermicro specification for DDR3 1333 non-ECC SODIMM.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
