We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge contacts, thin rectangular stick form factor

A-Tech

A-Tech 4GB DDR3 1333MHz CL9 1.5V Non-ECC SODIMM 204-Pin Laptop RAM

SKU CH-HH0G-6Z37Q

4 GB DDR3 SODIMM runs at 1333 MHz with CL9 latency and 1.5 V for compatible Supermicro laptops

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • Supermicro certified for verified compatibility
  • Hynix 4GB module built with 1333MHz DDR3 speed
  • CL9 latency and 1.5V standard voltage for stable operation
  • 204-pin SO-DIMM form factor fits laptop memory slots
  • Rigorously tested for dependable and reliable performance

Supermicro-Certified 4GB DDR3 SODIMM

This module is a single 4GB DDR3 1333MHz CL9 stick built to Supermicro specification MEM-DR340L-HL01-SO13. It targets owners of compatible Supermicro systems who need to replace or add memory in laptops or compact servers that accept 204-pin SO-DIMMs.

Install by aligning the notch

The 204-pin edge connector fits only one way; forcing it can damage the slot. Common issues are mixing voltages or using registered modules in an unbuffered slot, so verify the system requires 1.5V unbuffered non-ECC memory before fitting.

DDR3 1333 limits bandwidth to PC3-10600 speeds

The interface caps throughput at the rated frequency, so workloads needing higher transfer rates will not benefit from faster modules the platform cannot drive. Systems locked to this generation cannot use later DDR standards without a hardware change.

Highlights

  • Supermicro certified for verified compatibility
  • Hynix 4GB module built with 1333MHz DDR3 speed
  • CL9 latency and 1.5V standard voltage for stable operation
  • 204-pin SO-DIMM form factor fits laptop memory slots
  • Rigorously tested for dependable and reliable performance

Specifications

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR340L-HL01-SO13
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesSupermicro Certified MEM-DR340L-HL01-SO13 (Hynix)
Recommend UseCompatible Supermicro Systems

Questions about this item

How can I confirm the module is running at 1333 MHz with CL9 timing after installation?

Open Task Manager or CPU-Z in Windows, or run dmidecode on Linux, and verify the reported speed shows 1333 MHz and CAS latency reads CL9 for the installed stick.

Does the package include only the single 4 GB SODIMM or any extra brackets or tools?

The box contains one 4 GB 204-pin DDR3 SO-DIMM module; no brackets, screws or installation tools are supplied.

Should I choose the 1.5 V CL9 version or a different voltage or latency for my Supermicro system?

Select the 1.5 V CL9 module listed as MEM-DR340L-HL01-SO13; it matches the certified Supermicro specification for DDR3 1333 non-ECC SODIMM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.