Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green printed circuit board with black memory chips and gold edge contacts, thin rectangular stick form factor

A-Tech

A-Tech 4GB DDR3 1333MHz CL9 1.5V Non-ECC SODIMM 204-Pin Laptop RAM

SKU CH-HH0G-6Z37Q

4 GB DDR3 SODIMM runs at 1333 MHz with CL9 latency and 1.5 V for compatible Supermicro laptops

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • Supermicro certified for verified compatibility
  • Hynix 4GB module built with 1333MHz DDR3 speed
  • CL9 latency and 1.5V standard voltage for stable operation
  • 204-pin SO-DIMM form factor fits laptop memory slots
  • Rigorously tested for dependable and reliable performance

Supermicro-Certified 4GB DDR3 SODIMM

This module is a single 4GB DDR3 1333MHz CL9 stick built to Supermicro specification MEM-DR340L-HL01-SO13. It targets owners of compatible Supermicro systems who need to replace or add memory in laptops or compact servers that accept 204-pin SO-DIMMs.

Install by aligning the notch

The 204-pin edge connector fits only one way; forcing it can damage the slot. Common issues are mixing voltages or using registered modules in an unbuffered slot, so verify the system requires 1.5V unbuffered non-ECC memory before fitting.

DDR3 1333 limits bandwidth to PC3-10600 speeds

The interface caps throughput at the rated frequency, so workloads needing higher transfer rates will not benefit from faster modules the platform cannot drive. Systems locked to this generation cannot use later DDR standards without a hardware change.

Punti di forza

  • Supermicro certified for verified compatibility
  • Hynix 4GB module built with 1333MHz DDR3 speed
  • CL9 latency and 1.5V standard voltage for stable operation
  • 204-pin SO-DIMM form factor fits laptop memory slots
  • Rigorously tested for dependable and reliable performance

Caratteristiche tecniche

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR340L-HL01-SO13
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesSupermicro Certified MEM-DR340L-HL01-SO13 (Hynix)
Recommend UseCompatible Supermicro Systems

Domande su questo articolo

How can I confirm the module is running at 1333 MHz with CL9 timing after installation?

Open Task Manager or CPU-Z in Windows, or run dmidecode on Linux, and verify the reported speed shows 1333 MHz and CAS latency reads CL9 for the installed stick.

Does the package include only the single 4 GB SODIMM or any extra brackets or tools?

The box contains one 4 GB 204-pin DDR3 SO-DIMM module; no brackets, screws or installation tools are supplied.

Should I choose the 1.5 V CL9 version or a different voltage or latency for my Supermicro system?

Select the 1.5 V CL9 module listed as MEM-DR340L-HL01-SO13; it matches the certified Supermicro specification for DDR3 1333 non-ECC SODIMM.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.