Axiom
Axiom AX2533E4S/2G 2GB DDR2 533 ECC Unbuffered server RAM
2GB DDR2 533 ECC unbuffered server module with CL4 latency and 1.80V operation
- Capacity2GB
- Type240-Pin DDR2 SDRAM
- SpeedDDR2 533 (PC2 4200)
- CAS LatencyCL4
- Voltage1.80V
- ECCYes
- 2GB capacity supports memory-hungry server workloads
- DDR2 533 (PC2 4200) speed matches legacy platform specs
- ECC unbuffered design detects and corrects single-bit errors
- CL4 latency at 1.80V optimises timing for stable operation
- 240-pin form factor fits listed Gateway, Intel and Supermicro boards
Server Memory for DDR2 ECC Platforms
Axiom AX2533E4S/2G is a 2GB DDR2 533 (PC2 4200) ECC Unbuffered DIMM built to a 240-pin form factor. It operates at 1.80V with a CAS latency of CL4. The module is validated for Gateway E-9220, Intel Desktop Board D955 and D975, Server Board SE7230 and SUPERMICRO PDSG4 systems.
Suited for Legacy Servers and Workstations
This module fits administrators maintaining DDR2-era servers or workstations that require ECC unbuffered memory. It is not for systems that only accept registered DIMMs, platforms needing higher density than 2GB per slot, or boards limited to non-ECC memory. Buyers without a compatible DDR2 ECC platform cannot use this part.
240-Pin DDR2 533 ECC Unbuffered Specification
The decisive specification is the 240-pin DDR2 533 (PC2 4200) ECC unbuffered interface. Only motherboards with DDR2 slots that support unbuffered ECC at this speed and pin count will accept the module. Verify the board manual for DDR2 ECC unbuffered compatibility before ordering.
Põhijooned
- 2GB capacity supports memory-hungry server workloads
- DDR2 533 (PC2 4200) speed matches legacy platform specs
- ECC unbuffered design detects and corrects single-bit errors
- CL4 latency at 1.80V optimises timing for stable operation
- 240-pin form factor fits listed Gateway, Intel and Supermicro boards
Tehnilised andmed
| Brand | Axiom |
|---|---|
| Model | AX2533E4S/2G |
| Capacity | 2GB |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 533 (PC2 4200) |
| CAS Latency | CL4 |
| Voltage | 1.80V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Features | for Gateway E-9220; Intel Desktop Board D955, D975; Server Board SE7230; SUPERMICRO PDSG4 |
| Tarnekaal | 0.09 kg |
| Pakendi mõõtmed | 305 × 76 × 25 mm |
Küsimused selle toote kohta
How do I install this 240-pin DDR2 module and what step do people miss?
Align the notch with the slot key, press straight down until both retaining clips click, then verify the server BIOS detects the full 2GB at 533 MHz.
What maintenance or replacement will this ECC unbuffered stick need later?
No routine maintenance is required; replace only if memory diagnostics report correctable errors rising above threshold or a DIMM fails POST.
What limit appears first under sustained load with this CL4 1.80 V module?
The DDR2 533 bus bandwidth and CL4 latency ceiling constrain throughput before voltage or thermal limits become factors.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.



