暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Axiom

Axiom AX2533E4S/2G 2GB DDR2 533 ECC Unbuffered server RAM

SKU CH-ECRQ-DEYDZ MPN AX2533E4S/2G

2GB DDR2 533 ECC unbuffered server module with CL4 latency and 1.80V operation

  • Capacity2GB
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 533 (PC2 4200)
  • CAS LatencyCL4
  • Voltage1.80V
  • ECCYes
  • 2GB capacity supports memory-hungry server workloads
  • DDR2 533 (PC2 4200) speed matches legacy platform specs
  • ECC unbuffered design detects and corrects single-bit errors
  • CL4 latency at 1.80V optimises timing for stable operation
  • 240-pin form factor fits listed Gateway, Intel and Supermicro boards

Server Memory for DDR2 ECC Platforms

Axiom AX2533E4S/2G is a 2GB DDR2 533 (PC2 4200) ECC Unbuffered DIMM built to a 240-pin form factor. It operates at 1.80V with a CAS latency of CL4. The module is validated for Gateway E-9220, Intel Desktop Board D955 and D975, Server Board SE7230 and SUPERMICRO PDSG4 systems.

Suited for Legacy Servers and Workstations

This module fits administrators maintaining DDR2-era servers or workstations that require ECC unbuffered memory. It is not for systems that only accept registered DIMMs, platforms needing higher density than 2GB per slot, or boards limited to non-ECC memory. Buyers without a compatible DDR2 ECC platform cannot use this part.

240-Pin DDR2 533 ECC Unbuffered Specification

The decisive specification is the 240-pin DDR2 533 (PC2 4200) ECC unbuffered interface. Only motherboards with DDR2 slots that support unbuffered ECC at this speed and pin count will accept the module. Verify the board manual for DDR2 ECC unbuffered compatibility before ordering.

特長

  • 2GB capacity supports memory-hungry server workloads
  • DDR2 533 (PC2 4200) speed matches legacy platform specs
  • ECC unbuffered design detects and corrects single-bit errors
  • CL4 latency at 1.80V optimises timing for stable operation
  • 240-pin form factor fits listed Gateway, Intel and Supermicro boards

仕様

BrandAxiom
ModelAX2533E4S/2G
Capacity2GB
Type240-Pin DDR2 SDRAM
SpeedDDR2 533 (PC2 4200)
CAS LatencyCL4
Voltage1.80V
ECCYes
Buffered/RegisteredUnbuffered
Featuresfor Gateway E-9220; Intel Desktop Board D955, D975; Server Board SE7230; SUPERMICRO PDSG4
配送重量0.09 kg
梱包サイズ305 × 76 × 25 mm

この商品に関する質問

How do I install this 240-pin DDR2 module and what step do people miss?

Align the notch with the slot key, press straight down until both retaining clips click, then verify the server BIOS detects the full 2GB at 533 MHz.

What maintenance or replacement will this ECC unbuffered stick need later?

No routine maintenance is required; replace only if memory diagnostics report correctable errors rising above threshold or a DIMM fails POST.

What limit appears first under sustained load with this CL4 1.80 V module?

The DDR2 533 bus bandwidth and CL4 latency ceiling constrain throughput before voltage or thermal limits become factors.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。