我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Axiom

Axiom AX2533E4S/2G 2GB DDR2 533 ECC Unbuffered server RAM

SKU CH-ECRQ-DEYDZ MPN AX2533E4S/2G

2GB DDR2 533 ECC unbuffered server module with CL4 latency and 1.80V operation

  • Capacity2GB
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 533 (PC2 4200)
  • CAS LatencyCL4
  • Voltage1.80V
  • ECCYes
  • 2GB capacity supports memory-hungry server workloads
  • DDR2 533 (PC2 4200) speed matches legacy platform specs
  • ECC unbuffered design detects and corrects single-bit errors
  • CL4 latency at 1.80V optimises timing for stable operation
  • 240-pin form factor fits listed Gateway, Intel and Supermicro boards

Server Memory for DDR2 ECC Platforms

Axiom AX2533E4S/2G is a 2GB DDR2 533 (PC2 4200) ECC Unbuffered DIMM built to a 240-pin form factor. It operates at 1.80V with a CAS latency of CL4. The module is validated for Gateway E-9220, Intel Desktop Board D955 and D975, Server Board SE7230 and SUPERMICRO PDSG4 systems.

Suited for Legacy Servers and Workstations

This module fits administrators maintaining DDR2-era servers or workstations that require ECC unbuffered memory. It is not for systems that only accept registered DIMMs, platforms needing higher density than 2GB per slot, or boards limited to non-ECC memory. Buyers without a compatible DDR2 ECC platform cannot use this part.

240-Pin DDR2 533 ECC Unbuffered Specification

The decisive specification is the 240-pin DDR2 533 (PC2 4200) ECC unbuffered interface. Only motherboards with DDR2 slots that support unbuffered ECC at this speed and pin count will accept the module. Verify the board manual for DDR2 ECC unbuffered compatibility before ordering.

商品特色

  • 2GB capacity supports memory-hungry server workloads
  • DDR2 533 (PC2 4200) speed matches legacy platform specs
  • ECC unbuffered design detects and corrects single-bit errors
  • CL4 latency at 1.80V optimises timing for stable operation
  • 240-pin form factor fits listed Gateway, Intel and Supermicro boards

商品規格

BrandAxiom
ModelAX2533E4S/2G
Capacity2GB
Type240-Pin DDR2 SDRAM
SpeedDDR2 533 (PC2 4200)
CAS LatencyCL4
Voltage1.80V
ECCYes
Buffered/RegisteredUnbuffered
Featuresfor Gateway E-9220; Intel Desktop Board D955, D975; Server Board SE7230; SUPERMICRO PDSG4
出貨重量0.09 kg
包裝尺寸305 × 76 × 25 mm

商品問答

How do I install this 240-pin DDR2 module and what step do people miss?

Align the notch with the slot key, press straight down until both retaining clips click, then verify the server BIOS detects the full 2GB at 533 MHz.

What maintenance or replacement will this ECC unbuffered stick need later?

No routine maintenance is required; replace only if memory diagnostics report correctable errors rising above threshold or a DIMM fails POST.

What limit appears first under sustained load with this CL4 1.80 V module?

The DDR2 533 bus bandwidth and CL4 latency ceiling constrain throughput before voltage or thermal limits become factors.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。