OWC 16GB (2x8GB) DDR4 2666MHz CL19 ECC SODIMM 1.2V
- 16GB (2 x 8GB)
- 260-Pin DDR4 SO-DIMM
OWC
16 GB DDR4 ECC SO-DIMM at 2666 MHz CL19 for Synology DS723+ and DS923+ NAS
Capacity 16GB (1 x 16GB)
被劃上刪除線的選項確實存在,但本站並無供貨。
This OWC module provides 16GB of DDR4 memory at 2666MHz with CL19 latency. It operates at 1.2V and uses a 260-pin SODIMM form factor with ECC error correction. The unbuffered design targets compatible micro servers, NAS systems, and POS terminals requiring data integrity.
Buyers expanding memory in a Synology DiskStation DS723+ or DS923+ NAS will find this module validated for those platforms. Systems needing registered or buffered DIMMs, non-ECC memory, or capacities beyond a single 16GB stick should look at other options.
The single specification that determines compatibility is the ECC unbuffered SODIMM designation at 2666MHz CL19. Your motherboard or NAS must explicitly support DDR4 ECC unbuffered SO-DIMMs to use this module.
| Brand | Yes |
|---|---|
| Part Number | 2C6D42R816GB |
| Capacity | 16GB (1 x 16GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | ECC |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
No, the 16 GB DDR4 module has no moving parts or consumable cells; it runs at 1.2 V and requires no scheduled replacement under normal use.
The 2666 MT/s PC4-21300 bus caps peak bandwidth; CL19 adds fixed cycle delay but does not throttle continuous transfer rates.
At 1.2 V the module draws only a few watts and has no heat spreader, so it adds minimal warmth inside a DS723+ or DS923+ chassis.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?