Bestoss
Bestoss GM228 2TB M.2 PCIe NVMe 2280 internal SSD
2 TB M.2 2280 NVMe drive with PCIe 3.0 x4 interface, 3D NAND and HMB plus dynamic SLC cache delivering up to 2200 MB/s read and 1500 MB/s write
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity2TB
- Memory Components3D NAND
- InterfacePCI-Express 3.0 x4
- Up to 2200 MB/s sequential read speeds system boots and loads fast
- Up to 1500 MB/s sequential write speeds large files transfer quickly
- PCIe 3.0 x4 NVMe interface fits most laptops and desktops
- 3D NAND with HMB and dynamic SLC cache sustains performance without DRAM
- 88 hour endurance testing plus shock resistance protects stored data
Bestoss GM228 2TB NVMe SSD
The Bestoss GM228 is a 2TB internal solid-state drive built on the M.2 2280 form factor with a PCIe 3.0 x4 interface and NVMe protocol. It uses 3D NAND flash and operates without a dedicated DRAM cache, relying on HMB and dynamic SLC caching for performance. Sequential reads reach up to 2200 MBps and writes up to 1500 MBps.
Suits everyday PC and laptop upgrades
This drive fits users who want a straightforward capacity boost for a desktop, laptop or NAS that has an M.2 slot wired for PCIe 3.0 or 4.0. The package includes a screwdriver and mounting screws for a simple installation. Buyers needing sustained heavy write workloads or the highest random IOPS should consider drives with dedicated DRAM and higher endurance ratings.
PCIe 3.0 x4 interface decides fit
The drive connects through a PCIe 3.0 x4 link, so the host slot must support that interface to deliver the rated 2200 MBps read speed. A PCIe 4.0 slot will run the drive at 3.0 speeds, while a slot wired only for two lanes or an older protocol will limit throughput further. Check the motherboard or laptop specification for M.2 PCIe 3.0 x4 support before purchasing.
Põhijooned
- Up to 2200 MB/s sequential read speeds system boots and loads fast
- Up to 1500 MB/s sequential write speeds large files transfer quickly
- PCIe 3.0 x4 NVMe interface fits most laptops and desktops
- 3D NAND with HMB and dynamic SLC cache sustains performance without DRAM
- 88 hour endurance testing plus shock resistance protects stored data
Tehnilised andmed
| Brand | Bestoss |
|---|---|
| Series | GM Series |
| Model | GM228 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe |
| Cache | No DRAM (HMB) |
| Max Sequential Read | Up to 2200 MBps |
| Max Sequential Write | Up to 1500 MBps |
Selle mudeli teised versioonid
5 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
Bestoss
Bestoss GM228 512GB M.2 2280 NVMe internal SSD
- Up to 2200 MBps
- Up to 1500 MBps
69,99 $
0.00090162BTC
Laos
Bestoss
Bestoss GM228 1TB M.2 2280 NVMe internal SSD
- Up to 2200 MBps
- Up to 1500 MBps
92,99 $
0.00119791BTC
Laos
Küsimused selle toote kohta
My motherboard only has a PCIe 3.0 M.2 slot — will the GM228 still reach its rated 2200 MB/s read speed?
Yes. The GM228 uses a PCIe 3.0 x4 interface and its maximum sequential read of 2200 MB/s is specified on that generation, so a PCIe 3.0 slot provides the full bandwidth the drive needs.
I have an older desktop with a PCIe 3.0 M.2 slot — will the GM228 work without a firmware update?
The drive follows the standard NVMe protocol over PCIe 3.0 x4 and is described as plug-and-play compatible with desktops, so it should be recognised by the system BIOS without a separate firmware step.
After installing the GM228, how can I verify it is delivering the advertised 2200 MB/s read performance?
Run a benchmark such as CrystalDiskMark on the freshly formatted drive; a sequential read result close to 2200 MB/s confirms the SSD is operating at its specified PCIe 3.0 x4 speed.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
