Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board M.2 2280 NVMe SSD with gold edge connector and black controller chip

Bestoss

Bestoss GM228 2TB M.2 PCIe NVMe 2280 internal SSD

SKU CH-PW21-9AD6S

2 TB M.2 2280 NVMe drive with PCIe 3.0 x4 interface, 3D NAND and HMB plus dynamic SLC cache delivering up to 2200 MB/s read and 1500 MB/s write

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity2TB
  • Memory Components3D NAND
  • InterfacePCI-Express 3.0 x4

Capacity 2TB

  • Up to 2200 MB/s sequential read speeds system boots and loads fast
  • Up to 1500 MB/s sequential write speeds large files transfer quickly
  • PCIe 3.0 x4 NVMe interface fits most laptops and desktops
  • 3D NAND with HMB and dynamic SLC cache sustains performance without DRAM
  • 88 hour endurance testing plus shock resistance protects stored data

Bestoss GM228 2TB NVMe SSD

The Bestoss GM228 is a 2TB internal solid-state drive built on the M.2 2280 form factor with a PCIe 3.0 x4 interface and NVMe protocol. It uses 3D NAND flash and operates without a dedicated DRAM cache, relying on HMB and dynamic SLC caching for performance. Sequential reads reach up to 2200 MBps and writes up to 1500 MBps.

Suits everyday PC and laptop upgrades

This drive fits users who want a straightforward capacity boost for a desktop, laptop or NAS that has an M.2 slot wired for PCIe 3.0 or 4.0. The package includes a screwdriver and mounting screws for a simple installation. Buyers needing sustained heavy write workloads or the highest random IOPS should consider drives with dedicated DRAM and higher endurance ratings.

PCIe 3.0 x4 interface decides fit

The drive connects through a PCIe 3.0 x4 link, so the host slot must support that interface to deliver the rated 2200 MBps read speed. A PCIe 4.0 slot will run the drive at 3.0 speeds, while a slot wired only for two lanes or an older protocol will limit throughput further. Check the motherboard or laptop specification for M.2 PCIe 3.0 x4 support before purchasing.

Přednosti

  • Up to 2200 MB/s sequential read speeds system boots and loads fast
  • Up to 1500 MB/s sequential write speeds large files transfer quickly
  • PCIe 3.0 x4 NVMe interface fits most laptops and desktops
  • 3D NAND with HMB and dynamic SLC cache sustains performance without DRAM
  • 88 hour endurance testing plus shock resistance protects stored data

Specifikace

BrandBestoss
SeriesGM Series
ModelGM228
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity2TB
Memory Components3D NAND
InterfacePCI-Express 3.0 x4
ProtocolNVMe
CacheNo DRAM (HMB)
Max Sequential ReadUp to 2200 MBps
Max Sequential WriteUp to 1500 MBps

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

My motherboard only has a PCIe 3.0 M.2 slot — will the GM228 still reach its rated 2200 MB/s read speed?

Yes. The GM228 uses a PCIe 3.0 x4 interface and its maximum sequential read of 2200 MB/s is specified on that generation, so a PCIe 3.0 slot provides the full bandwidth the drive needs.

I have an older desktop with a PCIe 3.0 M.2 slot — will the GM228 work without a firmware update?

The drive follows the standard NVMe protocol over PCIe 3.0 x4 and is described as plug-and-play compatible with desktops, so it should be recognised by the system BIOS without a separate firmware step.

After installing the GM228, how can I verify it is delivering the advertised 2200 MB/s read performance?

Run a benchmark such as CrystalDiskMark on the freshly formatted drive; a sequential read result close to 2200 MB/s confirms the SSD is operating at its specified PCIe 3.0 x4 speed.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.