Bestoss GM328 512GB NVMe internal SSD
- Up to 3200 MBps
- Up to 2500 MBps
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Bestoss
2 TB M.2 2280 NVMe drive with PCIe 3.0 x4 interface, 3D NAND and HMB plus dynamic SLC cache delivering up to 2200 MB/s read and 1500 MB/s write
The Bestoss GM228 is a 2TB internal solid-state drive built on the M.2 2280 form factor with a PCIe 3.0 x4 interface and NVMe protocol. It uses 3D NAND flash and operates without a dedicated DRAM cache, relying on HMB and dynamic SLC caching for performance. Sequential reads reach up to 2200 MBps and writes up to 1500 MBps.
This drive fits users who want a straightforward capacity boost for a desktop, laptop or NAS that has an M.2 slot wired for PCIe 3.0 or 4.0. The package includes a screwdriver and mounting screws for a simple installation. Buyers needing sustained heavy write workloads or the highest random IOPS should consider drives with dedicated DRAM and higher endurance ratings.
The drive connects through a PCIe 3.0 x4 link, so the host slot must support that interface to deliver the rated 2200 MBps read speed. A PCIe 4.0 slot will run the drive at 3.0 speeds, while a slot wired only for two lanes or an older protocol will limit throughput further. Check the motherboard or laptop specification for M.2 PCIe 3.0 x4 support before purchasing.
| Brand | Bestoss |
|---|---|
| Series | GM Series |
| Model | GM228 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe |
| Cache | No DRAM (HMB) |
| Max Sequential Read | Up to 2200 MBps |
| Max Sequential Write | Up to 1500 MBps |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes. The GM228 uses a PCIe 3.0 x4 interface and its maximum sequential read of 2200 MB/s is specified on that generation, so a PCIe 3.0 slot provides the full bandwidth the drive needs.
The drive follows the standard NVMe protocol over PCIe 3.0 x4 and is described as plug-and-play compatible with desktops, so it should be recognised by the system BIOS without a separate firmware step.
Run a benchmark such as CrystalDiskMark on the freshly formatted drive; a sequential read result close to 2200 MB/s confirms the SSD is operating at its specified PCIe 3.0 x4 speed.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?