Bitspower Notos 120mm DRGB Case Fan 1800 RPM 59 CFM 28 dBA 25mm Black White
- 1 Fan
- Case Fan
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
Bitspower
Three 120 mm hydro-bearing fans with addressable RGB lighting, running at 800–1800 RPM and moving up to 50 CFM at 28 dBA
Color Black / White
Läbikriipsutatud versioonid on olemas, kuid neid pole siin saadaval.
Model Notos Fan
Läbikriipsutatud versioonid on olemas, kuid neid pole siin saadaval.
Option 3 Packs
Läbikriipsutatud versioonid on olemas, kuid neid pole siin saadaval.
This set contains three 120 mm case fans with addressable digital RGB lighting. Each unit uses a hydro bearing and runs between 800 and 1800 RPM to deliver up to 50 CFM of airflow. Noise stays at a maximum of 28 dBA. The fans are rated for 30000 hours of operation at temperatures below 70 °C.
A dedicated DRGB multi-fan controller and a PWM fan hub ship in the box. The controller connects to a SATA power connector and provides a 5 V three-pin digital RGB header for motherboard synchronisation. The hub consolidates the three PWM four-pin fan headers into a single motherboard connection for unified speed control.
Verify that your motherboard offers a 5 V three-pin addressable RGB header with the correct pin order (+/D/-) before connecting the controller. Ensure a SATA power cable from the power supply is available for the controller unit. Confirm there is space for three 120 mm by 25 mm fans in your intended mounting locations.
| Brand | Bitspower |
|---|---|
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | 800~1800 RPM±10% |
| Air Flow | 45~50CFM(MAX) |
| Noise Level | 25~28dBA(Max) |
| Power Connector | PWM 4pin header / DRGB 5V 3pin header |
| Color | Black / White |
| LED | DRGB |
| Dimensions | 120x120x25mm |
Selle mudeli teised versioonid
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
The hydro bearings are rated for 30000 hours of operation; at continuous use that works out to roughly three and a half years before replacement is typically considered.
The fan curve caps at 1800 RPM ±10 % and 50 CFM maximum, so the mechanical speed limit is the first bottleneck under sustained load.
Peak noise is 28 dBA at 1800 RPM; the fans draw 12 V DC and are rated for ambient temperatures up to 70 °C, so case heat stays within normal operating limits.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Ükski keel ei vasta.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?