Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

Bitspower

Bitspower Touchaqua Notos 120 Digital RGB 3-Pack case fan

SKU CH-H4DK-GX3V8

Three 120 mm hydro-bearing fans with addressable RGB lighting, running at 800–1800 RPM and moving up to 50 CFM at 28 dBA

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • RPM800~1800 RPM±10%

Color Black / White

  • Black
  • Black / White
  • White

Genomstrukna varianter finns, men är inte i lager här.

Model Notos Fan

Genomstrukna varianter finns, men är inte i lager här.

Option 3 Packs

Genomstrukna varianter finns, men är inte i lager här.

  • Digital RGB syncs with motherboard via 5 V 3-pin header
  • Hydro bearing runs 800-1800 RPM at 25-28 dBA
  • 45-50 CFM airflow from seven-blade 120 mm frame
  • Three fans plus controller and hub included in pack
  • SATA-powered DRGB bar with eight LEDs per fan

Three-pack digital RGB case fans

This set contains three 120 mm case fans with addressable digital RGB lighting. Each unit uses a hydro bearing and runs between 800 and 1800 RPM to deliver up to 50 CFM of airflow. Noise stays at a maximum of 28 dBA. The fans are rated for 30000 hours of operation at temperatures below 70 °C.

Controller and cabling included

A dedicated DRGB multi-fan controller and a PWM fan hub ship in the box. The controller connects to a SATA power connector and provides a 5 V three-pin digital RGB header for motherboard synchronisation. The hub consolidates the three PWM four-pin fan headers into a single motherboard connection for unified speed control.

Check headers and voltage polarity

Verify that your motherboard offers a 5 V three-pin addressable RGB header with the correct pin order (+/D/-) before connecting the controller. Ensure a SATA power cable from the power supply is available for the controller unit. Confirm there is space for three 120 mm by 25 mm fans in your intended mounting locations.

I korthet

  • Digital RGB syncs with motherboard via 5 V 3-pin header
  • Hydro bearing runs 800-1800 RPM at 25-28 dBA
  • 45-50 CFM airflow from seven-blade 120 mm frame
  • Three fans plus controller and hub included in pack
  • SATA-powered DRGB bar with eight LEDs per fan

Specifikationer

BrandBitspower
Fan Counts3 Fans
TypeCase Fan
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM800~1800 RPM±10%
Air Flow45~50CFM(MAX)
Noise Level25~28dBA(Max)
Power ConnectorPWM 4pin header / DRGB 5V 3pin header
ColorBlack / White
LEDDRGB
Dimensions120x120x25mm

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How long before the hydro bearings on these 120 mm fans reach their rated 30000-hour lifespan?

The hydro bearings are rated for 30000 hours of operation; at continuous use that works out to roughly three and a half years before replacement is typically considered.

At 1800 RPM the airflow tops out at 50 CFM — what stops me pushing more air through the case?

The fan curve caps at 1800 RPM ±10 % and 50 CFM maximum, so the mechanical speed limit is the first bottleneck under sustained load.

With all three fans running at full speed from a SATA power cable, what noise and heat should I expect inside the chassis?

Peak noise is 28 dBA at 1800 RPM; the fans draw 12 V DC and are rated for ambient temperatures up to 70 °C, so case heat stays within normal operating limits.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.