Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

Bitspower

Bitspower Touchaqua Notos 120 Digital RGB 3-Pack case fan

SKU CH-H4DK-GX3V8

Three 120 mm hydro-bearing fans with addressable RGB lighting, running at 800–1800 RPM and moving up to 50 CFM at 28 dBA

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • RPM800~1800 RPM±10%

Color Black / White

  • Black
  • Black / White
  • White

De overstregede versioner findes, men er ikke på lager her.

Model Notos Fan

De overstregede versioner findes, men er ikke på lager her.

Option 3 Packs

De overstregede versioner findes, men er ikke på lager her.

  • Digital RGB syncs with motherboard via 5 V 3-pin header
  • Hydro bearing runs 800-1800 RPM at 25-28 dBA
  • 45-50 CFM airflow from seven-blade 120 mm frame
  • Three fans plus controller and hub included in pack
  • SATA-powered DRGB bar with eight LEDs per fan

Three-pack digital RGB case fans

This set contains three 120 mm case fans with addressable digital RGB lighting. Each unit uses a hydro bearing and runs between 800 and 1800 RPM to deliver up to 50 CFM of airflow. Noise stays at a maximum of 28 dBA. The fans are rated for 30000 hours of operation at temperatures below 70 °C.

Controller and cabling included

A dedicated DRGB multi-fan controller and a PWM fan hub ship in the box. The controller connects to a SATA power connector and provides a 5 V three-pin digital RGB header for motherboard synchronisation. The hub consolidates the three PWM four-pin fan headers into a single motherboard connection for unified speed control.

Check headers and voltage polarity

Verify that your motherboard offers a 5 V three-pin addressable RGB header with the correct pin order (+/D/-) before connecting the controller. Ensure a SATA power cable from the power supply is available for the controller unit. Confirm there is space for three 120 mm by 25 mm fans in your intended mounting locations.

Fordele

  • Digital RGB syncs with motherboard via 5 V 3-pin header
  • Hydro bearing runs 800-1800 RPM at 25-28 dBA
  • 45-50 CFM airflow from seven-blade 120 mm frame
  • Three fans plus controller and hub included in pack
  • SATA-powered DRGB bar with eight LEDs per fan

Specifikationer

BrandBitspower
Fan Counts3 Fans
TypeCase Fan
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM800~1800 RPM±10%
Air Flow45~50CFM(MAX)
Noise Level25~28dBA(Max)
Power ConnectorPWM 4pin header / DRGB 5V 3pin header
ColorBlack / White
LEDDRGB
Dimensions120x120x25mm

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How long before the hydro bearings on these 120 mm fans reach their rated 30000-hour lifespan?

The hydro bearings are rated for 30000 hours of operation; at continuous use that works out to roughly three and a half years before replacement is typically considered.

At 1800 RPM the airflow tops out at 50 CFM — what stops me pushing more air through the case?

The fan curve caps at 1800 RPM ±10 % and 50 CFM maximum, so the mechanical speed limit is the first bottleneck under sustained load.

With all three fans running at full speed from a SATA power cable, what noise and heat should I expect inside the chassis?

Peak noise is 28 dBA at 1800 RPM; the fans draw 12 V DC and are rated for ambient temperatures up to 70 °C, so case heat stays within normal operating limits.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.