Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Small rectangular mSATA circuit board, green finish, gold edge connector, black controller chip and silver label visible

Dogfish Technology

Dogfish Technology mSATA-250GB internal SSD

SKU CH-6A52-8C25X

mSATA internal SSD with 250 GB capacity, SATA III interface, up to 500 MB/s read and 450 MB/s write speeds

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactormSATA
  • Capacity250GB
  • Memory Components3D NAND
  • InterfaceSATA III

Options 250GB mSATA

Näita veel 2 konfiguratsiooni
  • Up to 500 MB/s sequential read speeds data transfers
  • Up to 450 MB/s sequential write speeds file saves
  • 3D NAND TLC memory increases storage density reliability
  • SATA III 6 Gb/s interface enables broad system compatibility
  • MTBF 1,000,000 hours supports long-term dependable operation

mSATA 250 GB internal SSD

The Dogfish Technology mSATA-250GB is a 250 GB solid state drive in the mSATA form factor. It connects through a SATA III 6 Gb/s interface and uses 3D NAND flash with an SMI controller. The drive is built for consumer desktops and laptops that have an mSATA slot.

Suits mSATA slots only; not for M.2 or 2.5 inch bays

This drive fits systems with a dedicated mSATA connector measuring 30 by 50.9 millimetres. It will not work in M.2 keyed slots or standard 2.5 inch SATA bays. Buyers upgrading an older ultrabook or embedded board with mSATA support should verify the slot type before ordering.

Sequential read up to 500 MB/s

The controller delivers maximum sequential read speeds of 500 MB/s and maximum sequential write speeds of 450 MB/s over the SATA III link. These figures determine whether the drive meets the throughput needs of the target system.

Põhijooned

  • Up to 500 MB/s sequential read speeds data transfers
  • Up to 450 MB/s sequential write speeds file saves
  • 3D NAND TLC memory increases storage density reliability
  • SATA III 6 Gb/s interface enables broad system compatibility
  • MTBF 1,000,000 hours supports long-term dependable operation

Tehnilised andmed

BrandTHREE COLOUR DOGFISH
SeriesmSATA-250GB
ModelmSATA-250GB
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactormSATA
Capacity250GB
Memory Components3D NAND
InterfaceSATA III
ControllerSMI
Max Sequential ReadUp to 500 MBps
Max Sequential WriteUp to 450 MBps
MTBF1,000,000 hours
Operating Temperature0°C ~ +75°C
Storage Temperature-45°C ~ +85°C
Operating Humidity0% ~ 95%
Height30mm
Width50mm
Depth1mm
Weight7g

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Does my laptop need a specific mSATA slot to use this 250GB drive?

Yes, the system must provide an mSATA socket measuring 30 by 50.9 millimetres that supports the SATA III 6 Gb/s interface.

Will this 250GB mSATA SSD work if I keep my older SATA II motherboard?

The drive is backward compatible with SATA II ports, though sequential speeds will be limited to the older 3 Gb/s link rate.

How can I verify the 250GB mSATA SSD is healthy after installation?

Use any SMART monitoring tool to check that the drive reports zero reallocated sectors and that the temperature stays within the 0 to 75 °C operating range.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.