Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Small rectangular mSATA circuit board, green finish, gold edge connector, black controller chip and silver label visible

Dogfish Technology

Dogfish Technology mSATA-250GB internal SSD

SKU CH-6A52-8C25X

mSATA internal SSD with 250 GB capacity, SATA III interface, up to 500 MB/s read and 450 MB/s write speeds

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactormSATA
  • Capacity250GB
  • Memory Components3D NAND
  • InterfaceSATA III

Options 250GB mSATA

Ver 2 configuraciones más
  • Up to 500 MB/s sequential read speeds data transfers
  • Up to 450 MB/s sequential write speeds file saves
  • 3D NAND TLC memory increases storage density reliability
  • SATA III 6 Gb/s interface enables broad system compatibility
  • MTBF 1,000,000 hours supports long-term dependable operation

mSATA 250 GB internal SSD

The Dogfish Technology mSATA-250GB is a 250 GB solid state drive in the mSATA form factor. It connects through a SATA III 6 Gb/s interface and uses 3D NAND flash with an SMI controller. The drive is built for consumer desktops and laptops that have an mSATA slot.

Suits mSATA slots only; not for M.2 or 2.5 inch bays

This drive fits systems with a dedicated mSATA connector measuring 30 by 50.9 millimetres. It will not work in M.2 keyed slots or standard 2.5 inch SATA bays. Buyers upgrading an older ultrabook or embedded board with mSATA support should verify the slot type before ordering.

Sequential read up to 500 MB/s

The controller delivers maximum sequential read speeds of 500 MB/s and maximum sequential write speeds of 450 MB/s over the SATA III link. These figures determine whether the drive meets the throughput needs of the target system.

Puntos fuertes

  • Up to 500 MB/s sequential read speeds data transfers
  • Up to 450 MB/s sequential write speeds file saves
  • 3D NAND TLC memory increases storage density reliability
  • SATA III 6 Gb/s interface enables broad system compatibility
  • MTBF 1,000,000 hours supports long-term dependable operation

Especificaciones

BrandTHREE COLOUR DOGFISH
SeriesmSATA-250GB
ModelmSATA-250GB
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactormSATA
Capacity250GB
Memory Components3D NAND
InterfaceSATA III
ControllerSMI
Max Sequential ReadUp to 500 MBps
Max Sequential WriteUp to 450 MBps
MTBF1,000,000 hours
Operating Temperature0°C ~ +75°C
Storage Temperature-45°C ~ +85°C
Operating Humidity0% ~ 95%
Height30mm
Width50mm
Depth1mm
Weight7g

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Does my laptop need a specific mSATA slot to use this 250GB drive?

Yes, the system must provide an mSATA socket measuring 30 by 50.9 millimetres that supports the SATA III 6 Gb/s interface.

Will this 250GB mSATA SSD work if I keep my older SATA II motherboard?

The drive is backward compatible with SATA II ports, though sequential speeds will be limited to the older 3 Gb/s link rate.

How can I verify the 250GB mSATA SSD is healthy after installation?

Use any SMART monitoring tool to check that the drive reports zero reallocated sectors and that the temperature stays within the 0 to 75 °C operating range.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.