Dogfish Technology 2.5" SATA 64GB internal SSD
- Internal Solid Stat…
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Dogfish Technology
mSATA internal SSD with 250 GB capacity, SATA III interface, up to 500 MB/s read and 450 MB/s write speeds
Options 250GB mSATA
The Dogfish Technology mSATA-250GB is a 250 GB solid state drive in the mSATA form factor. It connects through a SATA III 6 Gb/s interface and uses 3D NAND flash with an SMI controller. The drive is built for consumer desktops and laptops that have an mSATA slot.
This drive fits systems with a dedicated mSATA connector measuring 30 by 50.9 millimetres. It will not work in M.2 keyed slots or standard 2.5 inch SATA bays. Buyers upgrading an older ultrabook or embedded board with mSATA support should verify the slot type before ordering.
The controller delivers maximum sequential read speeds of 500 MB/s and maximum sequential write speeds of 450 MB/s over the SATA III link. These figures determine whether the drive meets the throughput needs of the target system.
| Brand | THREE COLOUR DOGFISH |
|---|---|
| Series | mSATA-250GB |
| Model | mSATA-250GB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | mSATA |
| Capacity | 250GB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Controller | SMI |
| Max Sequential Read | Up to 500 MBps |
| Max Sequential Write | Up to 450 MBps |
| MTBF | 1,000,000 hours |
| Operating Temperature | 0°C ~ +75°C |
| Storage Temperature | -45°C ~ +85°C |
| Operating Humidity | 0% ~ 95% |
| Height | 30mm |
| Width | 50mm |
| Depth | 1mm |
| Weight | 7g |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the system must provide an mSATA socket measuring 30 by 50.9 millimetres that supports the SATA III 6 Gb/s interface.
The drive is backward compatible with SATA II ports, though sequential speeds will be limited to the older 3 Gb/s link rate.
Use any SMART monitoring tool to check that the drive reports zero reallocated sectors and that the temperature stays within the 0 to 75 °C operating range.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?