Dogfish Technology 2.5" SATA 64GB internal SSD
- Internal Solid Stat…
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Dogfish Technology
A 120 GB mSATA internal SSD with 3D NAND and SATA interface delivering up to 500 MB/s read and 420 MB/s write speeds
Options 120GB mSATA
The Dogfish Technology mSATA-120GB is an internal solid state drive with a 120GB capacity and an mSATA form factor. It uses 3D NAND flash memory and connects through a SATA III 6 Gb/s interface. The drive is intended for consumer desktop and laptop upgrades where an mSATA slot is available.
The drive measures 30mm by 50mm and fits standard mSATA slots. Installation requires only inserting the module into the slot and securing it with the board screw. Ensure the system BIOS recognises the SATA III interface; some older platforms may need a firmware update to boot from the drive. The controller supports TRIM, NCQ and DevSleep for standard operating system integration.
Sequential read reaches up to 500 MBps and sequential write up to 420 MBps according to the specification sheet. The SMI controller includes ECC, bad block management and wear levelling to maintain consistent throughput during extended writes. Operating temperature range is 0°C to 75°C, so adequate chassis airflow is advisable for prolonged heavy workloads.
| Brand | THREE COLOUR DOGFISH |
|---|---|
| Series | mSATA-120GB |
| Model | mSATA-120GB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | mSATA |
| Capacity | 120GB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Controller | SMI |
| Max Sequential Read | Up to 500 MBps |
| Max Sequential Write | Up to 420 MBps |
| MTBF | 1,000,000 hours |
| Operating Temperature | 0°C ~ +75°C |
| Storage Temperature | -45°C ~ +85°C |
| Operating Humidity | 0% ~ 95% |
| Height | 30mm |
| Width | 50mm |
| Depth | 1mm |
| Weight | 7g |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Run a SATA benchmark tool such as CrystalDiskMark and compare the sequential read result to the 500 MB/s specification; the drive should reach that figure when connected to a SATA III port.
The package contains only the 30 x 50.9 mm mSATA module; you must supply a compatible mSATA slot and any mounting screw required by your laptop or desktop.
Select the 120 GB variant listed as mSATA-120GB; it delivers the stated 500 MB/s sequential read and 420 MB/s sequential write using 3D NAND flash.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?