SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.0050194BTC
Laos
LORDWORLD
LORDWORLD PCIe to M.2 Adapter (E) with Cooling Fan for Raspberry Pi 5
Adds an M.2 NVMe slot with a temperature-controlled fan and heatsink to a Raspberry Pi 5 via its 16-pin PCIe interface
- Compact all-in-one board fits Pi 5 mounting holes exactly
- Temperature-controlled fan plus aluminium heatsink accelerates SSD cooling
- 16-pin cable links board to Pi 5 PCIe interface
- Accepts 2230 and 2242 NVMe drives in Gen2 and Gen3 modes
- Dual onboard LEDs show power and drive activity at a glance
Raspberry Pi 5 M.2 adapter with integrated cooling
This compact PCIe-to-M.2 board is built specifically for the Raspberry Pi 5. It lets makers and developers add fast NVMe storage to the single-board computer. The all-in-one design matches the Pi 5 footprint and mounting holes for a tidy, integrated build.
Fan and heatsink built around the 16-pin link
A temperature-controlled blower fan sits on an aluminium heatsink to keep the SSD cool under load. The adapter connects through the Pi 5's 16-pin PCIe interface using the supplied cable. Dual onboard LEDs show power and activity status at a glance.
Check drive length and boot support before ordering
Only 2230 and 2242 length M.2 NVMe drives fit the slot; longer 2280 modules cannot be used. The board operates in Gen2 and Gen3 modes and supports booting the Pi 5 directly from the NVMe drive. Ensure your chosen SSD matches the listed form factors.
Põhijooned
- Compact all-in-one board fits Pi 5 mounting holes exactly
- Temperature-controlled fan plus aluminium heatsink accelerates SSD cooling
- 16-pin cable links board to Pi 5 PCIe interface
- Accepts 2230 and 2242 NVMe drives in Gen2 and Gen3 modes
- Dual onboard LEDs show power and drive activity at a glance
Tehnilised andmed
| Brand | LORDWORLD |
|---|
Küsimused selle toote kohta
What PCIe generation does the 16-pin interface support for the NVMe drive?
The adapter runs the NVMe drive in Gen2 or Gen3 mode through the 16-pin PCIe connection on the Raspberry Pi 5.
Which M.2 form factors fit the board and how is it secured to the Pi?
The board accepts 2230 and 2242 drives and uses mounting holes that align with the Raspberry Pi 5 for a direct screw-down fit.
How is the adapter connected and what BIOS step enables booting from the NVMe drive?
A 16-pin cable links the adapter to the Pi 5; after hardware assembly you must enable PCIe boot in the Pi 5 EEPROM config so the board loads the OS from the NVMe drive.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
