저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green circuit board with silver M.2 slot and black cooling fan attached to Raspberry Pi 5 via ribbon cable

LORDWORLD

LORDWORLD PCIe to M.2 Adapter (E) with Cooling Fan for Raspberry Pi 5

SKU CH-GHPJ-1K7ZP

Adds an M.2 NVMe slot with a temperature-controlled fan and heatsink to a Raspberry Pi 5 via its 16-pin PCIe interface

  • Compact all-in-one board fits Pi 5 mounting holes exactly
  • Temperature-controlled fan plus aluminium heatsink accelerates SSD cooling
  • 16-pin cable links board to Pi 5 PCIe interface
  • Accepts 2230 and 2242 NVMe drives in Gen2 and Gen3 modes
  • Dual onboard LEDs show power and drive activity at a glance

Raspberry Pi 5 M.2 adapter with integrated cooling

This compact PCIe-to-M.2 board is built specifically for the Raspberry Pi 5. It lets makers and developers add fast NVMe storage to the single-board computer. The all-in-one design matches the Pi 5 footprint and mounting holes for a tidy, integrated build.

Fan and heatsink built around the 16-pin link

A temperature-controlled blower fan sits on an aluminium heatsink to keep the SSD cool under load. The adapter connects through the Pi 5's 16-pin PCIe interface using the supplied cable. Dual onboard LEDs show power and activity status at a glance.

Check drive length and boot support before ordering

Only 2230 and 2242 length M.2 NVMe drives fit the slot; longer 2280 modules cannot be used. The board operates in Gen2 and Gen3 modes and supports booting the Pi 5 directly from the NVMe drive. Ensure your chosen SSD matches the listed form factors.

주요 특징

  • Compact all-in-one board fits Pi 5 mounting holes exactly
  • Temperature-controlled fan plus aluminium heatsink accelerates SSD cooling
  • 16-pin cable links board to Pi 5 PCIe interface
  • Accepts 2230 and 2242 NVMe drives in Gen2 and Gen3 modes
  • Dual onboard LEDs show power and drive activity at a glance

사양

BrandLORDWORLD

이 상품에 대한 질문

What PCIe generation does the 16-pin interface support for the NVMe drive?

The adapter runs the NVMe drive in Gen2 or Gen3 mode through the 16-pin PCIe connection on the Raspberry Pi 5.

Which M.2 form factors fit the board and how is it secured to the Pi?

The board accepts 2230 and 2242 drives and uses mounting holes that align with the Raspberry Pi 5 for a direct screw-down fit.

How is the adapter connected and what BIOS step enables booting from the NVMe drive?

A 16-pin cable links the adapter to the Pi 5; after hardware assembly you must enable PCIe boot in the Pi 5 EEPROM config so the board loads the OS from the NVMe drive.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.