我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with silver M.2 slot and black cooling fan attached to Raspberry Pi 5 via ribbon cable

LORDWORLD

LORDWORLD PCIe to M.2 Adapter (E) with Cooling Fan for Raspberry Pi 5

SKU CH-GHPJ-1K7ZP

Adds an M.2 NVMe slot with a temperature-controlled fan and heatsink to a Raspberry Pi 5 via its 16-pin PCIe interface

  • Compact all-in-one board fits Pi 5 mounting holes exactly
  • Temperature-controlled fan plus aluminium heatsink accelerates SSD cooling
  • 16-pin cable links board to Pi 5 PCIe interface
  • Accepts 2230 and 2242 NVMe drives in Gen2 and Gen3 modes
  • Dual onboard LEDs show power and drive activity at a glance

Raspberry Pi 5 M.2 adapter with integrated cooling

This compact PCIe-to-M.2 board is built specifically for the Raspberry Pi 5. It lets makers and developers add fast NVMe storage to the single-board computer. The all-in-one design matches the Pi 5 footprint and mounting holes for a tidy, integrated build.

Fan and heatsink built around the 16-pin link

A temperature-controlled blower fan sits on an aluminium heatsink to keep the SSD cool under load. The adapter connects through the Pi 5's 16-pin PCIe interface using the supplied cable. Dual onboard LEDs show power and activity status at a glance.

Check drive length and boot support before ordering

Only 2230 and 2242 length M.2 NVMe drives fit the slot; longer 2280 modules cannot be used. The board operates in Gen2 and Gen3 modes and supports booting the Pi 5 directly from the NVMe drive. Ensure your chosen SSD matches the listed form factors.

商品特色

  • Compact all-in-one board fits Pi 5 mounting holes exactly
  • Temperature-controlled fan plus aluminium heatsink accelerates SSD cooling
  • 16-pin cable links board to Pi 5 PCIe interface
  • Accepts 2230 and 2242 NVMe drives in Gen2 and Gen3 modes
  • Dual onboard LEDs show power and drive activity at a glance

商品規格

BrandLORDWORLD

商品問答

What PCIe generation does the 16-pin interface support for the NVMe drive?

The adapter runs the NVMe drive in Gen2 or Gen3 mode through the 16-pin PCIe connection on the Raspberry Pi 5.

Which M.2 form factors fit the board and how is it secured to the Pi?

The board accepts 2230 and 2242 drives and uses mounting holes that align with the Raspberry Pi 5 for a direct screw-down fit.

How is the adapter connected and what BIOS step enables booting from the NVMe drive?

A 16-pin cable links the adapter to the Pi 5; after hardware assembly you must enable PCIe boot in the Pi 5 EEPROM config so the board loads the OS from the NVMe drive.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。