Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green Raspberry Pi Pico 2 W board with pre-soldered header pins visible

LORDWORLD

LORDWORLD Raspberry Pi Pico 2 W Development Board with Pre-Soldered Header

SKU CH-NA46-4ZWWY

A microcontroller board with pre-soldered headers, dual-core RP2350 processor, WiFi 4 and Bluetooth 5.2 wireless, plus 26 configurable GPIO pins

  • Ready to code with colourful pre-soldered header
  • Choose Arm Cortex-M33 or Hazard3 RISC-V cores
  • Connect projects via WiFi 4 and Bluetooth 5.2
  • 26 configurable GPIO pins enable flexible integration
  • Supported by C/C++ MicroPython SDK and tutorials

Pico 2 W development board

The LORDWORLD Raspberry Pi Pico 2 W is a microcontroller board built around the RP2350 dual-core processor. It comes with a pre-soldered colourful header so you can start wiring circuits immediately. The board targets makers, students and engineers who want a compact platform for IoT prototypes, sensor projects or learning embedded programming with C/C++ and MicroPython.

Pre-soldered header and wireless

The header pins are already fitted, removing the need for a soldering iron before first use and giving a reliable mechanical connection for breadboards or custom PCBs. Onboard is an Infineon CYW43439 chip that provides WiFi 4 and Bluetooth 5.2, letting the board join local networks or talk to phones and sensors without extra modules. The 26 multi-function GPIO pins can be reconfigured for digital, analogue, PWM, UART, I2C or SPI roles as your design requires.

RP2350 architecture limits

The RP2350 offers two Arm Cortex-M33 cores and two open-hardware Hazard3 RISC-V cores, but only one architecture pair can run at a time so you must choose your toolchain upfront. Wireless bandwidth is capped by the WiFi 4 standard, so high-throughput streaming or large firmware transfers will be slower than on newer Wi-Fi generations. The board has no onboard battery management or voltage regulation beyond the USB supply, so portable designs need external power circuitry.

Põhijooned

  • Ready to code with colourful pre-soldered header
  • Choose Arm Cortex-M33 or Hazard3 RISC-V cores
  • Connect projects via WiFi 4 and Bluetooth 5.2
  • 26 configurable GPIO pins enable flexible integration
  • Supported by C/C++ MicroPython SDK and tutorials

Tehnilised andmed

BrandLORDWORLD

Küsimused selle toote kohta

What wireless standards does the onboard Infineon CYW43439 chip support on the Pico 2 W?

The Infineon CYW43439 provides WiFi 4 and Bluetooth 5.2 connectivity for the board.

What physical space does the pre-soldered header occupy on the Pico 2 W?

The colourful header is already soldered across the 26 multi-function GPIO pins, so the board needs clearance for that pin row.

Which SDK do I install first to program the RP2350 on this board?

Download the official Raspberry Pi Pico SDK, then choose the Arm Cortex-M33 or Hazard3 RISC-V toolchain in the project configuration.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.