LORDWORLD Raspberry Pi Pico 2 W Development Board with Pre-Soldered Header

Pico 2 W development board

The LORDWORLD Raspberry Pi Pico 2 W is a microcontroller board built around the RP2350 dual-core processor. It comes with a pre-soldered colourful header so you can start wiring circuits immediately. The board targets makers, students and engineers who want a compact platform for IoT prototypes, sensor projects or learning embedded programming with C/C++ and MicroPython.

Pre-soldered header and wireless

The header pins are already fitted, removing the need for a soldering iron before first use and giving a reliable mechanical connection for breadboards or custom PCBs. Onboard is an Infineon CYW43439 chip that provides WiFi 4 and Bluetooth 5.2, letting the board join local networks or talk to phones and sensors without extra modules. The 26 multi-function GPIO pins can be reconfigured for digital, analogue, PWM, UART, I2C or SPI roles as your design requires.

RP2350 architecture limits

The RP2350 offers two Arm Cortex-M33 cores and two open-hardware Hazard3 RISC-V cores, but only one architecture pair can run at a time so you must choose your toolchain upfront. Wireless bandwidth is capped by the WiFi 4 standard, so high-throughput streaming or large firmware transfers will be slower than on newer Wi-Fi generations. The board has no onboard battery management or voltage regulation beyond the USB supply, so portable designs need external power circuitry.